Denon AVR-590 manual 38

ENGLISH

StartedGetting	4 select the display mode.
	Press	and hold it down for a 2 seconds or more to
Connections	There are two modes for display the contents recorded on the
	Remote mode ：Displayed on the iPod’s screen.
	iPod.
	Browse mode ：Displayed on the TV screen.
Settings	Display mode			Browse mode	Remote mode
	Playable	Audio file		S	S
Playback	files	Video file		Sz1	Sz2
	Active	Remote control		S	S
	buttons	unit (AVR-590)
Remote		iPod®		A	S
Control	z1：When using an ASD-11R, ASD-3N or ASD-3W control dock for
	iPod.
	z2：Video may not be output, depending on the combination of
Information	ASD-1R or ASD-11R and iPod.
	Use ui to select the menu, then
	5 press	or p to select the music
Troubleshooting	or video file to be played.
	Press	or p.
	6 Playback starts.
Specifications	7 Use	to adjust the volume.
	level setting.		– – –	–80.0dB ~ 18.0dB
	GVariable rangeH
	※ The variable range differs according to the input signal and channel

8 Select the desired surround mode. (vpage 37 “Selecting the Surround Mode”)

9 Adjust the desired sound field effects. (vpage 39 “Adjusting the sound Field Effects”)

nTo stop

During playback, either press and hold

or press .

nStopping playback temporarily

During playback, press or .

Press again to resume playback.

nTo cue to the beginning of a track

During playback,either press (to cue to

the current track) or (to cue to the next track).

nRepeat playback and shuffle playback

“iPod Playback Mode” (vpage 33)

•Use the RESTORER mode to expand the low and high frequency components of compressed audio files and achieve a richer sound. The default setting is “Mode3” (vpage 43).

•To check the name of the title, the artist or the album when playing

in browse mode, press .

•The time (default : 30 sec) for which the on-screen display are displayed can be set at menu “iPod Information” (vpage 29). Press uio p to return to the original screen.

•Press and set the AVR-590’s power to the standby mode before disconnecting the iPod. Also switch the input source to one to which the menu “iPod dock” is not assigned before disconnecting the iPod.

NOTE

•Depending on the type of iPod and the software version, some functions may not operate.

•DENON will accept no responsibility whatsoever for any loss of iPod data.

Playing Components

Viewing Still Pictures or Videos on the iPod®

•Photo and video data on the iPod can be viewed on the monitor. Only for iPod equipped with slideshow or video functions. (When using an ASD-1R or ASD-11R)

•Video may not be output, depending on the combination of ASD-1R or ASD-11R and iPod.

1 Press and hold to set the Remote mode.

“Remote iPod” is displayed on the AVR- 590’s display.

2 Watching the iPod’s screen, use ui to select “Photos” or “Videos”.

3Pressdisplayed. until the image you want to view is

“TV Out” at the iPod’s “Slideshow Settings” or “Video Settings” must be set to “On” in order to display the iPod’s photo data or videos on the monitor. For details, see the iPod’s operating instructions.

iPod is a trademark of Apple Inc., registered in the U.S. and other countries. The iPod may only be used to copy or play contents that are not copyrighted or contents for which copying or playback is legally permitted for your private use as an individual. Be sure to comply with applicable copyright legislation.

35