ENGLISH

Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup)

Step 1 : Connect the included Setup Microphone

NOTE

NOTE

Started Getting

•Do not disconnect the setup microphone until the Audyssey Auto Setup procedure is completed.

•When using headphones, unplug the headphones before starting the Audyssey Auto Setup procedure.

1 Check the speaker connections. (vpage 11 “Connecting the Speakers ”)

2 Turn on the power of the TV and subwoofer. Set the TV’s input to the AVR-590.

3 Turn on the AVR-590’s power. (vpage 16 “Turning the Power On ”)

4Connect the included calibrated setup microphone to the SETUP MIC jack on the main unit.

The Audyssey Auto Setup screen appears automatically.

Sound receptor

5Mount the setup microphone on a tripod or stand and install it at the main listening position.

When installing the setup microphone, adjust its height so that the section where the sound is received is at the height of the ears during listening.

Setup microphone

•Do not hold the microphone in your hand during measurements.

•Avoid placing the microphone close to a seat back or wall as sound reflections may give inaccurate results.

When using a subwoofer on which the volume can be adjusted and the crossover frequency can be set

When using a subwoofer, make the following settings before starting the Audyssey Auto Setup procedure:

nWhen using a subwoofer with a direct mode

Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting.

nWhen using a subwoofer without a direct mode

Make the following settings:

• Volume

:“12 o’clock position”

• Crossover frequency

:“Maximum/Highest Frequency”

• Low pass filter

:“Off”

• Standby mode

:“Off”

Specifications Troubleshooting Information Control Remote Playback Settings Connections

20