ENGLISH

Getting

Adjust the volume of the
different speakers

Started

 

Saving frequently used settings

 

Various memory functions
(Quick Select Function)

Personal Memory Plus Function

 

 

 

 

 

You can adjust the channel level either according to the playback

 

 

sources or to suit your taste, as described below.

Connections

Adjust the volume of the different speakers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Press

 

.

 

 

 

 

 

 

 

 

Channel Volume

 

 

 

 

 

 

 

 

 

 

 

Settings

 

 

 

 

 

SR

0.0dB

 

 

 

 

FL

 

0.0dB

 

 

 

C

 

0.0dB

SBR

0.0dB

 

 

FR

 

0.0dB SBL

0.0dB

 

 

SW

 

0.0dB SL

0.0dB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Playback

 

 

 

 

 

Fader

 

 

 

 

 

 

 

 

 

 

 

 

 

FRONT : REAR

 

 

 

 

 

 

 

 

 

[

 

]:CH Sel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remote

 

2

Press uito select the speaker.

 

 

 

 

 

 

 

 

The speaker that can be set switches each time one of the

buttons is pressed.

 

 

 

 

 

 

 

 

Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Press opto adjust the volume.

 

 

 

 

 

 

 

 

 

 

 

 

 

Information

 

 

 

 

 

 

 

 

 

 

 

 

 

bIn the case of a subwoofer, reducing the volume when it is at

“–12 dB” will change the setting to “OFF” (none).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Troubleshooting

If headphones are plugged in, the headphones settings screen

appears.

 

 

 

 

 

 

 

 

 

 

 

 

Adjusting the volume of groups of speakers

(Fader Function)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Specifications

This function lets you adjust (fade) the sound from all the front (Front

speaker / center speaker / Front Height speaker) or rear (Surround speaker /

Surround Back speaker) speakers at once.

 

Use

or ito select “Fader”, then select the item to

 

 

 

 

 

1 be adjusting using oor p.

2Press opto adjust the volume of the speakers.

The fader function does not affect the subwoofer.

The fader can be adjusted until the volume of the speaker adjusted to the lowest value is –12 dB.

This function allows you to save all the settings shown in step

1.When frequently used settings are saved, they can easily be set again the next time you want to use them. This function also allows you to always enjoy the same playback environment.

• Three sets of settings can be saved.

Saving the settings

1 Set the items below to the settings you want to save.

q Input source (vpage 34) w Input Mode (vpage 32) e Surround Mode (vpage 37)

r Audyssey Settings (MultEQ, Dynamic EQ, Dynamic Volume) (vpage 41)

t Volume setting (vpage 34)

2 Press and hold the desired

until “Memory”

appears on the display.

The current settings will be memorized.

GQuick Select DefaultsH

 

Input Source

Volume

Quick Select 1

DVD

–40 dB

Quick Select 2

SAT/CBL

–40 dB

Quick Select 3

VCR/iPod

–40 dB

Calling the settings out

Press the at which the settings you want to call out are saved.

NOTE

Input sources stored with the quick select function cannot be selected if they have been deleted at menu “Source Delete” (vpage 28). In this case, store them again.

nNaming Quick Select settings

“Quick Select Name” (vpage 29).

This function sets the settings (input mode, surround mode, HDMI output mode, MultEQ, Dynamic EQ, Dynamic Volume, audio delay etc.) last selected for the individual input sources.

The surround parameters, tone settings and the volumes of the different speakers are stored for the individual surround modes.

Last Function Memory

This stores the settings as they were directly before the standby mode was set.

When the power is turned back on, the settings are restored to as they were directly before the standby mode was set.

Backup Memory

The various settings are backed up for about 1 week, even if the power is turned off or the power cord is disconnected.

45