dSource Delete

Remove input sources that are not used from the display.

[Selectable items]

ON : Use this source.

Delete : Do not use this source.

Default

Resets the settings to the default values.

NOTE

•Input sources being used in the various zones cannot be deleted.

•Input sources set to “Delete” cannot be selected using SOURCE SELECT.

fOn-Screen Display

Make on-screen display related settings.

Screensaver

Make screensaver settings.

Use the screensaver to prevent burn-in on the monitor screen. When set to “ON”, the screensaver is activated if there is no activity for about 3 minutes.

[Selectable items]

ON : Activate the screensaver if there is no activity for about 3 minutes.

OFF : Turn the screensaver function off.

When “Screensaver” is set to “ON”, the screensaver is activated if no operation is performed for about 3 minutes.

When you press uio p, the screen saver is cancelled and the screen before that screen saver started is displayed.

Text

Input source and mode display.

[Selectable items]

ON : Turn display on.

OFF : Turn display off.

Master Volume

Master volume display during adjustment.

[Selectable items]

ON : Turn display on.

OFF : Turn display off.

Tuner Information

This sets the time the on-screen display is displayed when a tuner operation is performed.

[Selectable items]

Always : Show display continuously.

30sec : Show display for 30 seconds after operation.

10sec : Show display for 10 seconds after operation.

OFF : Turn display off.

iPod Information

This sets the time the on-screen display is displayed when an iPod operation is performed.

[Selectable items]

Always : Show display continuously.

30sec : Show display for 30 seconds after operation.

10sec : Show display for 10 seconds after operation.

OFF : Turn display off.

Display Mode

Select the on-screen display’s display mode.

[Selectable items]

Mode1 : If there is no video signal, flickering of the on-screen display is not prevented.

Mode2 : Prevents flickering of the on-screen display when there is no video signal.

Use this mode if the on-screen display does not appear in the Mode 1, as may happen according to the TV being used.

ENGLISH

gQuick Select Name

Change the Quick Select name.

Up to 16 characters can be input.

[Input characters]

A ~ Z a ~ z 0 ~ 9 ! # % & ’ ( ) * + , - . / : ; = “ ? @ [ \ ] (space)

Default

Resets the settings to the default values.

hRemote ID Setup

Set remote control ID.

[Selectable items]

1

 

2

 

3

 

4

 

 

 

 

 

 

 

 

NOTE

When using the AVR-789 with only the included remote control unit (RC-1099), use Remote ID “1” (default).

When using a separately sold remote control unit (RC-7000CI, etc.), this function can be used. Match the ID setting of the remote control unit and the receiver.

Specifications Troubleshooting Information zone-Multi Control Remote Playback Setup Connections Started Getting

For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 18).

32