i/p Scaler

Make settings for i/p scaler function.

[Input source] DVD HDP TV/CBL VCR V.AUX

[Selectable items]

A to H : Use i/p scaler function for analog video signal. OFF : Do not use i/p scaler function.

NOTE

When the “Convert” setting is “OFF”, you cannot set “i/p scaler”.

Resolution

Make settings for resolution of HDMI video output signal.

[Input source] DVD HDP TV/CBL VCR V.AUX [Selectable items]

Auto : Detect monitor panel resolution and automatically set output resolution.

480p/576p : Output at 480p/576p resolution.

1080i : Output at 1080i resolution.

720p : Output at 720p resolution.

1080p : Output at 1080p resolution.

This can be set when “i/p Scaler” is set to “A to H”.

NOTE

•It is not possible to convert “1080i” signals into “720p” format.

•It is not possible to convert “720p” signals into “1080i” format.

Progressive Mode

Select optimum progressive mode for video material.

[Input source] DVD HDP TV/CBL VCR V.AUX

[Selectable items]

Auto : Automatically detect video material type.

Video1 : Select mode suitable for video playback.

Video2 : Select mode suitable for video and 30-frame film material playback.

This can be set when “i/p Scaler” is set to “A to H”.

Aspect

This sets the aspect ratio when outputting 480i/576i or 480p/576p input signals from the HDMI output connector.

[Input source] DVD HDP TV/CBL VCR V.AUX

[Selectable items]

Full : Output at 16:9 aspect ratio.

Normal : Output at 4:3 aspect ratio.

This can be set when “i/p Scaler” is set to “A to H”.

ENGLISH

Specifications Troubleshooting Information zone-Multi Control Remote Playback Setup Connections Started Getting

For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 18).

36