ENGLISH

Started Getting

Other Operations and Functions

Specifications Troubleshooting Information zone-Multi Control Remote Playback Setup Connections

Symbols used to indicate buttons in this manual

Button located on both the main unit and the remote control

unit BUTTON

Button only on the main unit <BUTTON>

Button only on the remote control unit [BUTTON]

<SOURCE SELECT>

<ZONE2/REC SELECT>

Other Operations

Recording on an External Equipment (REC OUT mode)

You can listen to one program source while recording a different program source.

1Press <ZONE2/REC SELECT>.

“ZONE2 Source” is shown on the display.

2Turn <SOURCE SELECT> until “RECOUT Source” is displayed.

The “

 

” indicator lights.

 

 

 

 

ZONE2 Source

 

ZONE2 TUNER

 

····

 

ZONE2 SIRIUS

 

 

 

RECOUT SIRIUS······ RECOUT TUNER RECOUT Source

3Turn <SOURCE SELECT> to choose the input source to be recorded.

4Play the program source.

For operating instructions, refer to the respective equipment’s operating instructions.

To record FM or AM broadcasts, select the broadcast (vpage 51).

5Start recording.

For operating instructions, refer to the respective equipment’s operating instructions.

•To cancel, press <ZONE2/REC SELECT>, then turn <SOURCE SELECT> until “ZONE2 Source” is displayed.

•Make a test recording before starting the actual recording.

•Sources selected with the REC OUT mode are output from ZONE2 as well.

•In the REC OUT mode, the remote control unit’s ZONE2 mode buttons cannot be operated.

•The “XM” and “SIRIUS” digital audio output signals are not output from the OPTICAL2 output connector.

•The source selected for ZONE2 is output from the digital output connector (OPTICAL 2).

NOTE

•Digital signals are not output from the analog REC OUT connector.

•Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder.

•Input sources for which “Delete” is selected at “Source Delete” cannot be selected.

57