ENGLISH
Playback
Started Getting
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit |
|
|
|
|
| BUTTON |
|
|
|
|
| ||
Button only on the main unit |
|
|
|
| <BUTTON> | |
|
| |||||
Button only on the remote control unit |
|
| [BUTTON] | |||
| ||||||
<SOURCE SELECT> | <MASTER VOLUME> | ||||||||||
<SOURCE> |
|
|
|
|
|
|
|
|
| ||
| PHONES jack |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preparations
Turning the Power On
1Press <POWER>.
The power indicator lights red and the power is set to the standby mode.
2Press <ON/STANDBY> or [ON/SOURCE].
The power indicator flashes green and the power turns on.
b Also press SOURCE SELECT when in standby mode, the power turns on. In this case the input source is selected by remote
control unit.
b Also press [QUICK SELECT] when in standby mode, the power turns on. In this case Quick Select is selected.
Turning the Power Off
Operations During Playback
Adjusting the Master Volume
Either turn <MASTER VOLUME> or press [MASTER VOLUME].
[Variable range] – – –
NOTE
The adjustable range will differ depending upon factors such as the type of input signal and the channel level setting.
Turning Off the Sound Temporarily (Muting)
Press [MUTING].
Multi Control Remote Playback Setup Connections
<POWER> <SPEAKERS> | qPress <ON/STANDBY> or [OFF]. | • The sound is reduced to the level set at menu “Manual Setup“ – |
The power is set to the standby mode. | “Option Setup“ – “Volume Control“ – “Mute Level“. | |
<ON/STANDBY> | wPress <POWER>. | • To cancel, press [MUTING] again. Muting can also be canceled by |
| The power indicator turns off, and so does the power. | adjusting the master volume. |
zone-
[Front] |
|
[OFF] | [ON/SOURCE] |
[QUICK SELECT] |
|
[SOURCE SELECT] |
|
NOTE
•Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long periods of time or when traveling, either press <POWER> to turn off the power, or unplug the power cord from the power outlet.
•When the
Listening with Headphones
Plug the headphones into the PHONES jack on the main unit.
The sound from the speakers and
Troubleshooting Information
[MASTER
VOLUME] 
[MUTING]
[Rear]
[SOURCE SELECT] 
Selecting the Input Source
Select the source using SOURCE SELECT.
Turn <SOURCE SELECT> or press [SOURCE SELECT] to switch between input sources.
If “Rec Select” is selected for the input source, press <SOURCE> before turning <SOURCE SELECT>.
NOTE
Be careful not to set the volume too high when using headphones.
Switching the front speakers
Press <SPEAKERS>.
Front A |
| Front B |
|
Front A+B
NOTE
When set to “Custom”, <SPEAKERS> does not operate.
Specifications
50