Denon DBP-2012UDCI Connecting a TV, NnConnecting to a device equipped with a DVI-D connector

Connecting a TV

•This connection is to connect the unit and a television directly.

•Check the television’s audio and video terminals and connect to one of them.

Cables used for connections

	Audio and video cable
HDMI cable
(sold separately)
Audio and video	(White)	L			L
cable	(Red)	R			R
(supplied)	(Yellow)
	Video cable
Component video	(Green)
cable	(Blue)
(sold separately)	(Red)
	TV		TV		TV	TV
			VIDEO		VIDEO	AUDIO
	HDMI	COMPONENT VIDEO			VIDEO	AUDIO
	IN		IN		IN		IN
		Y	PB	PR		R	L

R L

R L

		ENGLISH
NOTE			Simple
• Do not connect this unit’s video output via a VCR (Video Cassette Recorder). Some media contain copy			version
• The unit can play both NTSC and PAL discs.
prohibiting signals, which will disturb the screen image.
nnWhen connected to the television’s component video input terminal
	Press RESOLUTION according to the resolution of the
	connected television (vpage 25).		Basic
	• This unit’s component video output supports
			version
	480i/576i/480p/576p/720p/1080i output .
	• Images will not be projected normally if the television resolution
	and this unit’s output resolution do not match.
	• Copyright protected DVD is output in 480i/576i or 480p/576p.

nnConnecting to a device equipped with a DVI-D connector	Advanced
Use an HDMI DVI-D conversion cable.
• The audio signal is not output. Make the appropriate audio connections for your devices.
• The video signal will be in RGB format.	version
• You cannot output to a DVI-D device that does not support HDCP (high-bandwidth digital content
copyright protection system).
• Video may not be output depending on the combination of devices.

Information

13