Denon DBP-2012UDCI owner manual Video Setting

ENGLISH

	Video Setting
	Sets up TV connection, HDMI connection, and 3D video software playback.
TV	Default settings are underlined.

Set the video output signal according to the connected TV.

Setting items	Setting details
TV Aspect (Aspect ratio)	16:9 Squeeze Auto : Outputs to a wide screen TV. For 4:3 video, displays
Set the screen type and	in the center of the screen without changing the aspect ratio.z1
display mode of the TV.	WIDE (16:9) : Outputs to a wide-screen TV.
	4:3 PS : Outputs to a 4:3 TV. For wide video, trim the left and right side of
	the image and display in 4:3 aspect ratio.z2
	4:3 LB : Outputs to a 4:3 TV. Displays all of the wide video.
Wallpaper	Picture : Displays the DENON logo.
Setting for displaying the	Black : Sets the background to black.
background when playback	Gray : Sets the background to gray.
is stopped.	Blue : Sets the background to blue.
Progressive Modez3	Auto : Detects the type of video material and automatically switches the
Sets an appropriate	mode. Normally, this setting is used.
progressive conversion	Video : Suitable for playing video material discs.
mode for the source video	Film : Suitable for playing film material discs.
material.

z1 This has no effect with the video output.

z2 Depending on the video content, even though you set it to 4:3 PS (Pan Scan), the content may be output in 4:3 LB (Letter Box).

z3 This mode is activated for the video source of 480i/576i.

HDMI	Default settings are underlined.
Set the HDMI output signal.
Setting items	Setting details
Color Space	YCbCr : Outputs using the color difference video system (16 (black) to
Sets the video signal system	235 (white)).
to be output from HDMI.	RGB Normal : Outputs using the RGB video system
	(16 (black) to 235 (white)).
	RGB Enhanced : Outputs using the RGB video system
	(0 (black) to 255 (white)).
HDMI Deep Color	Auto : Deep Color is automatically output when the connected HDMI
Sets the HDMI terminal to	device supports Deep Color.
output Deep Color. Expands	Off : No Deep Color output.
the color depth (number of
used colors) of the HDMI
video signal, enabling
playback with more natural
colors and free of streaking.

3D	Default settings are underlined.
Sets up 3D video software playback.
Setting items	Setting details
3D Output Setting	Auto : Automatically determines whether the video software is 3D or 2D
Sets up video outputs for	and plays it back.
3D video playback (only for	• When you play 3D video, 3D and 2D video parts are played back as 3D
HDMI).	and 2D, respectively.
	• Normally, use this setting.
	Off : Always outputs 2D video signals.
TV Screen Size Setting	Use uio p or 0 – 9 to enter three digits for the screen size of your TV
Sets up the screen size of	in the setting screen, and press ENTER for confirmation.
your 3D enabled TV.	• The default setting is “046” (46’ TV screen size).

NOTE

Set up the correct size, otherwise you may not be able to view 3D video properly.

3D video playback operations may differ according to the disc to be used. Refer to the instruction manual supplied with your disc.

NOTE

When passing 3D video signals output from this device through an AV receiver to a 3D enabled TV, the AV receiver must also be compatible with inputting / outputting 3D video signals.

To view 3D video, use a 3D enabled TV.

•To connect the unit with a 3D enabled TV, use a high speed HDMI cable.

•During 3D playback, you cannot adjust “Video Resolution” (vpage 25), “HDMI output Settings” (vpage 25), or “Adjusting the picture quality” (vpage 26).

40

Remote control operation	Displaying the menu	Move the cursor	Decision the setting	Return to previous menu
buttons	Cancel the menu	(Up/Down/Left/Right)