1.Set the play mode to the single play mode.
2.In the stop mode, press the FOLDER button @2.
•The “FOLDER” indicator lights.
3.Turn the select knob !0to select the folder you want to listen to.
•The folder name scrolls on the display.
4.Press the REPEAT button !9.
•The “REPEAT 1” indicators light on the display and the single track repeat mode is set.
5.Press the PLAY (1) button y.
•Playback starts from the first track in the selected folder.
•Once the last track in the selected folder has
been played, playback resumes from the beginning of the first track in the selected folder and the tracks are repeated.
✽When the TIME button @0is pressed during playback, the track number of elapsed track time are displayed. (The “FOLDER” indicator do not turns off.)
2All track repeat1.Set the play mode to the continuous play mode.
2.In the stop mode, press the TITLE button @1to turn on the “FILE” indicator.
3.Press the REPEAT button !9.
•The “REPEAT” indicators light on the display and the all track repeat mode is set.
4.Press the PLAY (1) button y.
•The disc is played repeatedly.
•Once the last track on the disc is played, playback continues from the beginning of the first track.
2Single track repeat1.Set the play mode to the single play mode.
2.Press the REPEAT button !9.
•The “REPEAT 1” indicators light on the display and the single track repeat mode is set.
3.Turn the select knob !0to select the file you want to listen to.
•The file name scrolls on the display.
4.Press the PLAY button (1) y.
•Playback starts.
•Once the selected track ends, it is played again from the beginning.
•The single track repeat mode can also be set by pressing the REPEAT button !9 during playback. The current track is played repeatedly.
•To cancel the single track repeat mode, press the REPEAT button !9 repeatedly until the “REPEAT” indicator turns off.
8THE COMPACT DISC
Precautions on handling compact discs•Do not allow fingerprints, oil or dust on the surface of the compact disc. If the signal surface is dirty, wipe it off with a soft, dry cloth. Wipe in circular motions from the center and out.
•Do not use water, benzene, thinner, record sprays, electrostatic proof chemicals, or
•Always use care when handling discs to prevent damaging the surface, in particular when removing a disc from the case and returning it.
•Do not bend compact discs.
•Do not apply heat to compact discs.
•Do not enlarge the hole in the center of the disc.
•Do not write on the disc and do not attach any labels.
•Condensation will from on the disc surface if it is brought into a warm room from a cold area, such as outdoors during winter. Wait until the condensation disappears. Never dry discs with hair dryers, etc..
Precautions on storage•After playing a disc, always return it to its case.
•Keep discs in the cases when they are not to be played. This will protect them from dust and dirt and prolong their service life.
•Do not store discs in the following places :
1)Places exposed to direct sunlight for a considerable time.
2)Places subject to accumulation of dust or high humidity.
3)Places exposed to high temperatures, such as close to heater outlets.
9POWER ON PLAYBACK
Playback starts automatically when the power is turned on.
•The power on playback function can be set with the “PRESET FUNCTIONS AND OPERATIONS” (See page 14).
ENGLISH
10EXPANDED FUNCTION
Multiple units of the
•Refer to figure 1 to connect the equipment.
•Use a single RCA cable to connect the units’ CASCADE OUT jacks with the units’ CASCADE IN jacks.
•When the first and last units are connected as shown in figure 1, playback is performed endlessly.
•If the first and last units are not connected, operation stops at the last unit.
Cascade playback1.Set the cascade mode of all unit to the “Cas=ON”. (Preset function)
2.Press the PLAY (1) button y on unit 1. Playback starts.
• Playback on unit 1 ends, playback starts on unit 2.
3.Playback stops when the stop button on the unit currently playing is pressed.
Figure 1unit 1 |
unit 2 |
13