ENGLISH

NOTE:

The tally output pin has open collector IC specifications (Imax. 20 mA, Vmax. 3.3 V), but the maximum supply current is 80 mA, so use with a total load current of 80 mA or less.

uExternal synchronized control jacks (EXT. SYNC.)

• Connect these for synchronized recording.

iCascade control jacks (CASCADE)

•Connect these for continuous operation on multiple units.

•When the cascade mode is set to “ON”, the start signal is output from this output jack once operation is finished. (Preset function)

3CONNECTIONS

Leave your entire system (including the DN-C635) turned off until all connections between the DN-C635 and other components have been completed.

2Connection precautions

•Before proceeding with connections or disconnections of cables and power cords, be sure to turn all system components off.

•Ensure that all cables are connected properly to the L (left) and R (right) jacks.

•Insert plugs fully into the terminals.

•Connect the CD output jacks to the amplifier CD or AUX input jacks.

2Remote control connections
(3) DisplayqCD transport indicatorwMode display portion
FILE

: This lights when the file name of

 

MP3 is displayed.

FOLDER

: This lights in the folder selection

 

mode.

TITLE

: This lights when the title in the MP3

 

ID3-Tag or CD Text is displayed.

MP3

: This lights when a disc containing

 

MP3 format file is loaded.

PROG

: This lights in the program mode.

REPEAT, 1 : This lights in the repeat mode.

CASCADE : This lights in the cascade mode. (Preset function)

ALBUM : This lights when the album name in the MP3 ID3-Tag is displayed.

ARTIST : This lights when the artist name in the MP3 ID3-Tag is displayed.

t20 tracks music calender

•In the single track play mode, only the specified track lights.

•In the continuous play mode, everything from the specified track to the last track lights.

•Track numbers are displayed up to track 20. Track 21 and on are not displayed.

•MP3 is not displayed.

yMultiple display

•This displays Track No. of CD, playing time of CD, various operational information, text message, etc.

uTime mode indicator

ELAPSED : This lights when the elapsed time is displayed.

REMAIN : This lights when the remaining time is displayed.

TRACK(-)

TRACK(+)

FADER SWITCH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

4

5

6

7

8

9

10

 

 

23

6

23

5

23

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

15

 

16

17

18

 

 

22

23

24

 

 

 

 

 

CUE

 

 

 

PAUSE

 

 

PLAY

 

 

 

23

8

23

7

22

23

4

16

22

23

 

 

3

15

22

23

 

2

14

 

 

 

 

 

 

EOM

 

 

 

 

 

 

 

 

INDEX2/INDEX3

 

 

 

 

 

22

 

 

24

 

 

 

 

 

 

22

 

 

 

17

 

The rating of REMOTE connector pin 22 (TALLY POWER SUPPLY) is 3.3 V, 80 mA maximum. Avoid currents in excess of the rating.

e CD pitch displayi Infrared remote control indicator
r Playing position displayo Play mode indicators

•

This indicates the current position within the

•

“SINGLE” lights when in the single track play

 

track’s totalplaying time.

 

mode.

•

In the MP3 play mode, it may be unable to

•

“CONT.” lights when in the continuous play

 

display correctly.

 

mode.

2Installation precautions

•If the DN-C635 is placed near an amplifier, tuner or other components, noise (induced hum) or beat interference may result (especially during AM or FM reception).

If this occurs, separate the DN-C635 from other components or reorient its position.

NOTE:

•Use this unit in a horizontal orientation.

When the unit is used with the front panel facing upward (and the unit us in a vertical orientation) or when the front panel is on an incline, the unit will not operate properly.

8