4OPENING AND CLOSING THE DISC HOLDER AND LOADING A DISC
ENGLISH
5NORMAL CD PLAYBACK
✽. This operation only works while the power is on.
1.Press the power operation switch q to turn on the power.
2.Press the OPEN/CLOSE button e.
How to load a disc| (1) Starting playback | |
1. | Press the power operation switch q to turn on the |
| power. |
2. | Load the disc you want to play. |
3. | Make the presettings according to the usage |
| purpose. (See page 14.) |
| • Select the play finish mode. (Preset functions) |
| Finish stop : |
| The stop mode (the servo functions turn off) is |
When the CUE button r is pressed during the play mode, the pickup returns to the position at which playback started and the pause mode is set.
Press the | Press the |
| Press the |
1button | 3button | Press the 1button | CUE button |
•Make sure the disc holder is completely open.
•Hold the disc by the edges and place it on the disc tray. (Do not touch the signal surface, i.e., the glossy side.)
•When using 12 cm. diameter discs, make sure the outer edge matches the tray guide circumference and when using CD signals (8 cm. diameter) match the outer edge with the inner tray guide circumference.
•Press the OPEN/CLOSE button e to close the disc holder w.
•When the disc holder is open and a disc is loaded, you may also press the PLAY (1) button y to close the disc holder. (If the PLAY (1) button is pressed, playback will start immediately upon the disc contents having been read.)
2Messages•If you finger should get caught in the disc holder when it closes, press the OPEN/CLOSE button.
•Do not place any foreign objects on the disc tray, and do not place more than one disc on the tray at a time. Otherwise malfunction may occur.
•Do not push in the disc tray manually when the power is off as this may cause malfunction and damage the CD player.
•This player can play
set when playback finishes. |
| Finish next : |
The standby mode is set at the beginning of the |
next track when playback is finished. |
✽After the final track is played, the standby mode is set at the beginning of the first track.
Finish recue :When playback is finished, the standby mode is set at the position at which playback was started.
• To standby at the point where the sound begins. |
(Preset functions) |
Set the “C Det” level. |
When a track is selected, the position at which |
the sound begins is found when a track is cued |
and the standby mode is set at that point. |
• Press the PLAY MODE button !3to select the |
play mode. |
SINGLE : (single track play mode) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Position |
| Play intern | al |
|
|
|
|
| Play internal |
|
|
|
| on the | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| disc |
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
| Back cue operation |
|
| ||||||
1.Press the STOP (2) button u.
Sleep mode (Preset functions)• The sleep mode is set if no operation is |
performed for |
or manual search mode. |
When in the sleep mode, if the PLAY button is |
pressed, playback will be started from the |
beginning of the track in which the sleep mode |
was set. If the CUE button is pressed, it will |
Messages may appear on the display while using the
| Message | Meaning |
|
|
No Disc | No disc inserted, disc unreadable or disc inserted upside down. |
|
|
TOC Error | The disc information has not been read properly. |
|
|
Invalid CD | The disc is a |
|
|
Tray Error | The disc holder could not be opened or closed properly. |
|
|
The stop mode is set after the specified track is |
played. |
CONT. : (continuous play mode) |
The stop mode is set after the last track is |
played. |
4. Press the PLAY (1) button y. |
Playback can be temporarily halted and then continued from the same point in the track.
1.Press the PAUSE (3) button i during playback.
2.To continue playback, press the PLAY (1) button y.
standby for the beginning of the track in which |
the sleep mode was set. |
9