Operations Basic Playback Connections Started Getting

Front Panel

q

Rear Panel
q w e r t y u

i

Specifications Utility Function Memo

q Disc loading slot

Insert CDs here. Insert the CD slowly, then release it.

q PS/2 connector

Terminal for connecting a PS/2 keyboard.

w Analog output terminals (LINE OUT)

•This is unbalanced RCA output terminals.

•Audio signals outputs.

e Digital output terminal (DIGITAL OUT)

•Digital data is available from these terminals.

•Use 75 Ω/ohms pin cord for connection.

•We recommend you use braided wire type shielded cable.

NOTE

The playback level after analog conversion is set to –6 dB below the usual level to avoid digital distortion.

r D-Link connector

Terminal for connecting another DN-S1200. Exchange of memo data, keyboard data and relay command information is performed with another DN-S1200.

b Do not connect anything other than a DN- S1200.

b Use an RJ45 cross cable no longer than 3 meters for connection.

t USB B port

•USB MIDI and HID commands are sent from the DN-S1200 to the computer.

•USB MIDI and HID commands as well as USB AUDIO signals are received from the computer.

y USB A port

Only one mass storage device (USB memory, USB HDD, etc.) can be connected.

b Not compatible with USB hubs

u Fader start jack

•Connect the mixer here.

The various fader commands (play, pause, cue, etc.) are received from the mixer.

•Use a 3.5 mm stereo mini cord for connection.

iPOWER button

Push this button to turn power on and off.

NOTE

Do not turn off the power while a disc is loading or ejecting. Doing so could damage the CD mechanism and lead to malfunction.