Next Track Function (CD/USB)

This function allows you to select the next track during playback, without interrupting the currently playing track. The cross fader can be used for a smooth transition to the next track.

1Turning the next track mode on.e During playback, press the NEXT TRACK button.

The CUE button flashes when the next track mode is on.

b During seamless looping, the A/B TRIM mode is set.

b When the NEXT TRACK button is pressed again while

the next track mode is on, the next track mode is turned off.

b Only files from the same source can be selected in the next track mode.

Selecting the track.

 

2r Turn

either

the
PARAMETERS knob or the Scratch disc to select the track you want to playnext.3Selecting tracks with memo data.4t When the MEMO button is pressed at this time, the cue point of the memo datastored as the next track is selected.

b When another track is selected with the PARAMETERS knob or the MEMO button is pressed again, the stored memo data’s cue point is canceled.

5Starting file search.

y When the PARAMETERS knob or CUE button is pressed after the file is selected, the selected track is searched for in the play mode.

Once searching is completed and the standby mode is set, the CUE button lights and the 1 3 button flashes.

b The time display after the CUE button is pressed indicates the remaining playable time for the currently playing track.

6Starting next track playback.

u When the 1 3 button is pressed, playback of that track stops and playback of the next track starts.

b The currently playing track can be faded out when the next track is played.

b The fade-out time is 5 sec. max.

This time can be set at “PRESET” – “(4) NEXT Tr Cfade” (vpage 27).

7Even if the next track is ready to play, if the 1 3 button is not pressed, when in the

continuous play mode, playback of the next track begins when playback of the current track has ended.

The operation is the same in the single play mode.

NOTE

•The remaining playable time for the currently playing track is a maximum of 10 seconds after the next track is searched for.

•You can push 1 3 button at any time during these last 10 sec to start the Next track.

Scratch

1Selecting the scratch mode.iPress the JOG MODE button and select“Scratch”.

The JOG MODE button/flashes orange.

b Scratch play can be performed immediately when the JOG MODE

button is lit.

b When the JOG MODE button is flashing or off, it is not possible to start scratch play immediately because for example no disc is loaded or the parameter input mode is set.

2Starting scratch play.o Press and turn the Scratch disc.

Scratch play starts.

3Stopping scratch play.Release the Scratch disc.

Scratch play stops and the play or pause mode is set.

Specifications Utility Function Memo Operations Basic Playback Connections Started Getting

16