Specifications Utility Function Memo Operations Basic Playback Connections Started Getting

Part Names and Functions

For buttons not explained here, see the page indicated in parentheses ( ).

Top Panel

Note that there are many buttons working two different function selected by short time pushing or long pushing (1 second or more). The “⋅” mark indicates short time push function and “–” mark indicates long time push function.

Q0 Q1Q2 Q3 Q4Q5Q6Q7

o

Q8

 

i

Q9

u

 

y

 

t

 

r

 

e

W0

w

q PLAY/PAUSE button (1 3)

•This button will start or pause playback.

•Push once to start playback, once again to pause playback, and once more to resume playback.

w CUE/STUTTER button

⋅CUE (Back cue):

Pushing this button in play mode will force the file back to the position which playback started. While in search mode, it makes new Cue point.

⋅Stutter:

In Cue mode, by pushing the CUE button makes a Stutter sound from the Cue point.This is called Stutter play.

e FILTER button

One of three filters (LOW PASS, MID PASS and HIGH PASS) can be selected.

r FLANGER button

The depth and delay time can be selected.

t ECHO/LOOP button

The ECHO and LOOP functions can be selected. The feedback level and delay time can be selected. Looping for the delay time (ECHO LOOP) is possible by setting the feedback level to “MAX”.

y TAP, LOCK, -AUTO/INPUT BPM button

⋅ TAP:

When you push this button repeatedly, the

Auto mode turns off and starts measuring your

Beats Per Minute (BPM) by tapping.

⋅ BPM LOCK:

When this button is pressed once while the

Auto BPM counter is operating, the data

measured by the Auto BPM counter is locked.

⋅ AUTO:

When pushing the TAP button for 1 second,

activates AUTO BPM mode. The measured

BPM is displayed in the character section of

the display.

⋅ MANUAL INPUT:

u EXIT/RELOOP button

Use this to exit or return back again to Seamless loop playback. You can add variety to looping with this function.

iNEXT TRACK button, A/BTRIM buttons When the button is pressed during playback, the next track mode is selected. When pressed during seamless looping, the mode for adjusting seamless loop point A or B is set, and when pressed again, the next track is set.

o FLIP/CLR button

⋅FLIP:

Use this to select operating mode of A1 and A2 buttons, from Hot Start mode and Stutter mode.

The display will indicate “H/S” or “STR”.

⋅A1, A2 CLR:

If the A1 or A2 buttons is pushed while pushing the FLIP button, you can clear the selected A

point.

By holding down just the FLIP button for more than 1 sec, you can clear A1 and A2 points all at once.

Q0A1, A2 button

Using this button you can create starting point for Hot Start, Seamless Loop and Stutter.

Q1B button

Use this to set the B point for to create a Seamless Loop after the A point has been set.

q

W1

When the TAP button is pressed and held in

for more than 2 seconds, the BPM input mode

W2

W8 W7 W6 W5W4W3

is set and the BPM value can be input directly

with the PARAMETERS knob. When the TAP

button is pressed again, the BPM input mode

is turned off.

NOTE

•If you select a new file, AUTO BPM mode turns on automatically.

•BPM data can be saved to the MEMO function.