Specifications Utility Function Memo Operations Basic Playback Connections Started Getting

t

er,y

y

y,u q

w,r,o w,i

Changing the playing speed (pitch) temporarily

The pitch bend function can be used to change the playing speed

temporarily. The DN-S1200 includes two pitch bend functions using the PITCH BEND buttons and the Scratch disc.

1GPITCH BEND ＋/－H

q Press the PITCH BEND + button to increase the playing speed, the PITCH BEND – button to decrease the playing speed.

2GPLATTER/SCRATCHH

w The scratch disc turns during playback when

the JOG MODE button has been pressed to set

the scratch disc mode to “BEND/ SEARCH”.

The playing speed changes.

Relay playback

Relay playback is possible when two DN-S1200s are connected by D-Link.

When “PRESET” – “(21) Relay” (vpage 27) is set to “ON”, the relay play mode is set.

1In the single play mode, when the end of the track is reached, the standby mode is set at the next track and playback starts on the other DN-S1200.

2In the continuous play mode, playback starts on the other DN-S1200 once the last track is played.

3When the relay play mode on two DN-S1200s is used, playback is performed alternately on the two DN- S1200s.

b When “PRESET” – “(21) Relay” (vpage 27) is set to “OFF”, the relay play mode is canceled.

Power on playback

When “PRESET” – “(20) Power on Play” (vpage 27) is selected and the power is turned on with a disc loaded, playback starts from the first track on the disc.

NOTE

If no disc is loaded, playback will not start when the power is turned on, even if “Power on Play” is set to “ON”.

15