(27)Version No:The DN-S1200’s software version is displayed. (SYSTEM / DSP)

(28)Touch Int.:The Adjust the Scratch disc.

1)Press the PARAMETERS knob and select “Touch Int”. “Cancel” flashes on the character display.

2)Turn the PARAMETERS knob to display “OK”.

3)Press the PARAMETERS button.

“Touch Initial!” is displayed once initialization is completed.

4)Once clearing is completed, “Completed!” is displayed.

(29)Preset Int:Set all the preset data back to the factory defaults.

1)To clear the PRESET data, push the PARAMETERS button. “Preset Int?” flashes on the character display.

2)Push the PARAMETERS button again. “Preset Initial!” is displayed on the character display while data clearing.

3)Once clearing is completed, “Complete!” is displayed.

Compatible Files

The files that can be played using an external USB memory device are as shown below.

NOTE

•Depending on the type of MP3 encoding software, with some files noise may be generated or it may not be possible to play the file.

•Recordings you make are for your personal use and should not be used in ways infringing upon the copyright holder as per copyright laws.

•With MP3 files, the files cannot be played if the pitch is 24% or greater.

MP3/WAV FORMAT

 

MPEG-1

Audio Layer-3 40-320kbps f/s 44.1kHz, ,STEREO

 

 

 

MP3 Format

ID-3 Tag

V1.0, V1.1, V2.2, V2.3, V2.4

(ASCII + ISO8859-1(West European))

 

 

 

 

 

 

Encording

C.B.R, V.B.R.

 

 

 

 

PCM

16bit f/s 44.1kHz

WAV Format

 

 

Metadata Tag

Supported by Denon DJ Music Manager, Audio Grabber,

 

Dragon Tagger

 

 

 

 

 

.m3u and .xml playlists are supported only through DENON DJ Music Manager.

Specifications Utility Function Memo Operations Basic Playback Connections Started Getting

28