Denon DRA-395 1, 2, 3, 4

17
ENGLISH
Multi-Source recording/playback
The Multi-Source function allows you to record a source other than the source currently playing or to output its signal to the MULTI ZONE output
terminal.
[1] Playing one source while recording another (REC OUT mode)
B
1, 4 2
1Press the REC OUT button.
•lights and the unit is set to
the REC OUT mode.
REC
REC OUT
2Press the SELECT button until the
source you want to record appears
on the set's display.
•The indicator for the selected
program source lights.
3Set the recording mode.
•For operating instructions, refer to the manual of the
component on which you want to record.
SELECT
21
4To cancel, press the REC OUT
button again.
•is extinguished and the REC OUT mode of this unit is
cancelled.
REC
NOTES:
•The signals of the source selected in the REC OUT mode are also
output from the ZONE 2 and ZONE 3 output terminals. (There
is output when ZONE 2 and ZONE 3 are ON.)
•When the REC OUT mode is set and both the ZONE 2 and
ZONE 3 modes are set to “ON”, the modes do not turn off
even when the REC OUT button is pressed.
To turn them off, set the ZONE 2 and ZONE 3 modes to
“OFF”.
(Main unit)
(Main unit)
REC OUT
(Main unit)
DISPLAY