ENGLISH

Connections

 

Connections

 

 

 

 

 

Connecting the MULTI ZONE terminals

 

Connecting the power supply cord

 

For instructions on operations using the MULTI ZONE functions ( page 17).

ZONE2 (or ZONE3) PRE OUT connections

•If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 (or ZONE3) pre- out (variable or fixed level) terminals can be used to play a different program source in ZONE2 (or

ZONE3) the same time ( page 17).

•The ZONE2 video out is only for the ZONE2.

•The ZONE3 video out is only for the ZONE3.

•When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2 (ZONE3), the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 (ZONE3) using the remote control unit.

 

Input

Output

 

+

+

AUX OUT

 

 

Extension terminal for future use.

RC-616

RC-617

 

Infrared retransmitter

Infrared sensor

 

 

Monitor

 

(ZONE2 or ZONE3)

G

(ZONE2)

 

 

 

 

VIDEO

 

 

IN

 

Poweramplifier

A

(ZONE2or ZONE3))

 

 

L

L

L

IN

R

R

R

AC outlet

(wall)

AC 120 V, 60 Hz

AC OUTLETS

• SWITCHED (total capacity – 120 W (1 A)) The power to the outlet is turned on and off in conjunction with the POWER switch on the main unit, and when the power is switched between on and standby from the remote control unit.

No power is supplied from this outlet when this unit’s power is at standby. Never connect equipment whose total power consumption exceeds 120 W (1 A).

NOTE:

•Insert the plugs securely. Incomplete connections will result in the generation of noise.

•Only use the AC OUTLETS for audio equipment. Never use it for hair driers, monitors or other electrical appliances.

•For the AUDIO output, use high quality pin-plug cables and wire in such a way that there is no humming or noise.

•For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.

10

ENGLISH