Operation

FUNCTION

<ZONE/REC SELECT>

[CHANNEL]

FUNCTION

[VOLUME]

[MODE SELECTOR 1] [MODE SELECTOR 2]

[ZONE2 ON]

[ZONE3 OFF]

[ZONE2 OFF]

[ZONE3 ON]

FUNCTION [MAIN ON/OFF]

About the button names in this explanation

<> : Buttons on the main unit

[

] : Buttons on the remote control unit

Button name only :

Buttons on the main unit and remote control unit

Outputting a program source to amplifier, etc., in the ZONE2 (or ZONE3) room (ZONE2 or ZONE3 SELECT mode)

1 Press <ZONE/REC SELECT> to select “M-ZONE”.

M-ZONE RECOUT

2 Use FUNCTION to select the source you want to output appears on the display.

•The “ ” indicator and the indicator for the selected source light.

3 Start playing the source to be output.

For operating instructions, refer to the manuals of the respective components.

•The signals of the source selected in the ZONE mode are also output from the VCR and CD-R/TAPE recording output terminals.

18

ENGLISH

Operation

Remote control unit operations during multi- source playback

1 Set [MODE SELECTOR 1] to the “B”.

2 Set [MODE SELECTOR 2] to the “ZONE2” or “ZONE3”.

3 Press [ZONE2 (ZONE3) ON] to turn on the zone power.

To cancel the ZONE2 or ZONE3 mode:

Press [ZONE2 OFF] or [ZONE3 OFF].

4 Use [FUNCTION] to select the input source you wish to output.

•The “ ” indicator and the indicator for the selected source light.

The MULTI ZONE source switches directly.

When the MULTI ZONE SOURCE function is set to “TUNER”, the preset channel can be selected pressing [CHANNEL].

5 The volume of the outputs of the different zones can be adjusted with [VOLUME].

Default volume setting ZONE2/ZONE3 : – – – dB (Minimum)

The zone volume can be adjusted within the range of –80 to 18 dB, in steps of 0.5 dB.

•When using ZONE2 or ZONE3, it is possible to turn the power for the MAIN ZONE only on or off by pressing [MAIN ON/OFF].

ENGLISH