OperationChecking the currently playing program source, etc.Press STATUS.

•The current program source and various settings are indicated on the display.

Switching the brightness of the display
¢When you do not want to adjust the tonePress <TONE DEFEAT> to select “TONE DEFEAT ON”.¢When listening with the volume turned lowPress <LOUDNESS> to select “LOUDNESS ON”.

ENGLISH

Operation

Listening to the radio

Check that the remote control unit is set to “A”.

Auto preset memory

This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in the preset memory.

1 Press <ON/STANDBY> and set the DRA-397’s power to the standby mode.

Press [DIMMER].

The brightness of the display can be adjusted in three steps. The display can also be turned off.

Selecting the play mode (PURE DIRECT)

This mode reproduces the sound with extremely high quality. The display that could affect the audio signals are turned “OFF”.

Adjusting the speaker volume1 Press <CH VOL> to select the speaker.

The settable speaker switches each time this button is pressed.

2 Use <SELECT> to adjust the volume.

Can be adjusted within the range of –12 dB to +12 dB.

2 Hold <PRESET •> and press <ON/STANDBY>.

• The unit automatically begins searching for FM broadcast stations.

When the first FM broadcast station is found, that station is stored in the preset memory at channel A1.

Subsequent stations are automatically stored in order at preset channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to F8 and G1 to G8 for a maximum of 56 stations.

Channel A1 is tuned in after the auto preset memory operation is completed.

Press PURE DIRECT.

 

 

 

Combining the currently playing sound with the

 

 

 

desired image (VIDEO SELECT function)

 

 

 

 

 

 

 

 

 

Press [VIDEO SELECT] until the desired image appears
Setting the tone control

 

on the display.
¢ Adjusting the tone

 

 

 

 

 

1

Press <TONE CONTROL> to select “BASS” or

 

 

“TREBLE”.

 

 

 

 

 

• To cancel, press [VIDEO SELECT] to select “SOURCE”.

2

Use <SELECT> to set the level.

 

• The video source selected with the video select function is stored in

 

 

the memory for the different input sources.

Can be adjusted within the range of –10 dB to +10 dB.

•If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it using the manual “Preset memory” operation.

•To interrupt this function, press <ON/STANDBY>.

¢Default settings

 

 

 

Auto tuner presets

A1

~ A8

87.5

/ 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /

90.1

MHz

 

 

 

 

 

B1

~ B8

520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,

90.1 / 90.1 MHz

 

 

 

 

 

 

C1

~ C8

90.1

MHz

 

 

 

 

D1

~ D8

90.1

MHz

 

 

 

 

E1

~ E8

90.1

MHz

 

 

 

 

F1

~ F8

90.1

MHz

 

 

 

 

G1

~ G8

90.1

MHz

 

 

 

 

12

ENGLISH