
ENGLISH
Operation
MODE<SELECT>
MEMORY
<ON/STANDBY> | MENU |
| ENTER |
[POWER OFF] 

MENU 

ENTER
[D H F G]
[NUMBER]
(0 ~ 9, +10)



[SEARCH]
MODE
MEMORY
About the button names in this explanation
<> : Buttons on the main unit
[ | ] : Buttons on the remote control unit |
Button name only :
Buttons on the main unit and remote control unit
Direct access of channels
1 Press [SEARCH] in the XM mode.
2 Press [NUMBER] to enter the desired channel.
For example, if you want to access channel 123 (ex.XM123) press [NUMBER] as shown below.
X M 0 0 1
X M 0 1 2
X M 1 2 3
(Remote control unit)
3 Once all number have been input, press ENTER to change the channel.
If the next [NUMBER] is not pressed within several seconds, the channel automatically switches to the channel number that was input.
15
Operation
Playing the iPod®
The music recorded on the iPod can be played when using a Control Dock for iPod
iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
With the iPod,
Setting the iPod Assignment
It is possible to assign the Control Dock for iPod’s
1 Press MENU.
2 Use <SELECT> or press [F G] to select the input terminals.
NONE:
This is the factory default setting.
DVD, VCR, V.A, CDR, CD:
When using a Control Dock for iPod, it is possible to connect with the audio input terminal of the assigned function.
3 Press ENTER.
•The optional standard Control Dock for iPod is DENON
•To assign to a different function after a function has already been assigned, switch to a function other than the one that is assigned then repeat the procedure.
NOTE:
•DENON will accept no responsibility whatsoever for loss or damage of data on an iPod occurring when the iPod is used connected to the
•Some of the functions may not operate, depending on the type of iPod and the software version.
ENGLISH