| Started Getting |
|
|
| Operation |
|
|
function | Network |
Application | PC |
| Troubleshooting |
| Specifications |
LCD button | LCD button |
NEXT
RC SETUP 
About the button names in these explanations
[ ] : LCD buttons for selection items Button name only:
Indicates a button on the remote control unit
Inserting buttons
1 Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2Press NEXT, then press [EDIT FUNC].
3Press [MOVE/INSERT].
4Press NEXT.
5At the “Source Device” screen, press the LCD button for the device of the button you want to move.
6At the “Select key” screen, press the LCD button for the button you want to move.
7Press NEXT.
8At the “Target Device” screen, press the LCD button for the device of the button for the place to be inserted.
9At the “Select key” screen, press the LCD button for insert destination.
10Press [YES].
The button is inserted.
bWhen [NO] is pressed, the setting menu reappears. To continue, press [YES].
Copying buttons
1
2Press NEXT, then press [EDIT FUNC].
3Press [COPY].
4Press NEXT.
5At the “Source Device” screen, press the LCD button for the device (equipment) of the button you want to copy.
6At the “Select key” screen, press the LCD button for the button you want to copy.
7Press NEXT.
8At the “Target Device” screen, press the LCD button of the device to copy to.
9At the “Select Key” screen, press the LCD button for copy destination.
10Press [YES]. The button is copied.
bWhen [NO] is pressed, the setting menu reappears. To continue, press [YES].
16