| Started Getting |
|
|
| Operation |
|
|
function | Network |
Application | PC |
| Troubleshooting |
| Specifications |
LCD button | LCD button |
NEXT
RC SETUP 
About the button names in these explanations
[ ] : LCD buttons for selection items Button name only:
Indicates a button on the remote control unit
Changing the button name
1 Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2Press NEXT, then press [EDIT TEXT].
3Press [KEY NAME].
4At the “Select Device” screen, press the LCD button for the device whose button name you want to change.
5At the “Select key” screen, select the LCD button for the button whose button name you want to change.
6Press NEXT.
7At the “Edit Text” screen, use the first column of LCD buttons to select the position of the character to be edited.
8Select the character to be input with the second column of LCD buttons, then press
[SELECT].
bLower case letters are input when [CAPS] is displayed, capital letters when [lower] is displayed.
Up to 12 characters can be input.
9Press [SAVE].
bWhen [NO] is pressed, the setting menu reappears. To continue, press [YES].
Deleting signals registered with the learning function
1 Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2Press [LEARNING].
3Press [ERASE LEARN].
4Press NEXT twice.
5At the “Source Device” screen, press the LCD button for the device you want to delete.
6At the “Select Key” screen, press the button for the learning function you want to erase.
7To delete, press [YES].
If you do not want to delete, press [NO].
bPress [NO] to end, [YES] to continue.
18