Denon RC-7000CI PC Application

	Started Getting
	Operation
function	Network
Application	PC
	Troubleshooting
	Specifications

PC Application

RC-7000CI Editor function

nYou can use “RC-7000CI Editor” for the following operations.

•Editing RC-7000CI setting data.

•Backing up RC-7000CI setting data on the PC.

•Remote control code database downloading.

nRecommended devices and environment required for using “RC-7000CI Editor”.

•Personal computer running Windows® XP Service Pack2 operating system.

•HDD with sufficient free disk space.

•USB 2.0 connection terminal.

•Internet connection environment

RC-7000CI Editor installation

First connect the RC-7000CI to the personal computer using the USB cable provided.

Use a computer connected to the Internet.

1Load the CD-ROM (RC-7000CI Editor) in the CD-ROM drive.

2Run “RC-7000CI Editor.exe”

bFollow the installation instructions on the installation wizard screen.

bAfter installation, the “Installation complete” dialog message is displayed.

3Press “Finish” to finish installation, and start the application.

Using RC-7000CI Editor

1When using the application for the first time, check the New User box, enter e-mail address, password, etc., and press OK.

2Run “RC-7000CI Editor.exe” from the CD- ROM drive in My Computer.

“RC-7000CI Editor” starts up.

3Follow the wizard instructions.

NOTE

•During data upload or download using “RC-7000CI Editor” do not carry out the following operations. Failure of the main unit and personal computer may result.

•Remove the USB cable.

•Switch off the personal computer power.

•Remove batteries from main unit.

26