ENGLISH

Started Getting

Connections

Specifications Troubleshooting Functions Other Timer the Setting Playback Setup Connections

Connections for all compatible audio signal format is described in this operating instructions. Please select the types of connections suited for the equipment you are connecting.

With some types of connections, certain settings must be made on the RCD-CX1. For details, refer to the instructions for the respective connection items below.

NOTE

•Do not plug in the power cord until all connections have been completed.

•When making connections, also refer to the operating instructions of the other components.

•Be sure to connect the left and right channels properly (left with left, right with right).

•Do not bundle power cords together with connection cables. Doing so can result in humming or noise.

Preparations

Cables Used for Connections

Select the cables according to the equipment being connected.

 

Audio cables

 

Optical digital connections

 

 

Optical cable

 

Analog connections (stereo)

 

(White)

L

L

(Red)

R

R

Stereo pin-plug cable

Speaker connections

Speaker cables

Signal direction

Audio signal:

OutputInput

Using the AM Loop Antenna
nTo use suspended on a wall

Suspend directly on the wall without assembling.

Nail, tack, etc.

nTo use standing alone

Use the procedure below to assemble.

Assembling the AM Loop Antenna
1Bend in the direction of the arrow.2Insert into the hole.

InputOutput