Connections to Other Devices

Antenna terminals

AM / FM

The AM and FM reception sensitivity depends on the place the antenna is set and the direction in which it is set. Set it so that reception is best.

AM loop

FM indoor antenna

antenna

(supplied)

(supplied)

Connecting the Power Cord

Wait until all connections have been completed before connecting the power cord.

To household power outlet (AC 120 V, 60 Hz)

Power cord

(supplied)

NOTE

•Insert the AC plugs securely. Incomplete connections could cause noise.

•When the power cord is plugged into the power outlet, the power indicator flashes orange for about 10 seconds. Do not unplug the power cord before the power indicator turns off and the RCD-CX1 enters Standby mode.

•Only use the supplied power cord.

•Be sure the power cord is unplugged from the power outlet before connecting or disconnecting it to the AC IN.

Once Connections are Completed

ENGLISH

Functions Other Timer the Setting Playback Setup Connections Started Getting

nConnecting the AM loop antenna1Push the lever.2Insert the conductor. 3Return the lever.

Turning the Power On (vpage 12)

NOTE

•Make sure the AM loop antenna lead terminals do not touch metal parts of the panel.

•Do not connect two FM antennas simultaneously.

Specifications Troubleshooting

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

10