ENGLISH

Playback

Started Getting

Preparations

Turning the Power On
Press ON/STANDBY.

•The power turns on. Press again to set the power to standby.

•When the power is turned on, the function that was being used when the power was last turned off is selected (vpage 22 “Last function memory”).

GWhen the last function was CDH

When no disc is loaded, “NO DISC” is displayed.

Power indicator

Standby∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Off Power on∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Red When the timer is set∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Orange

NOTE

•Power continues to be supplied to some of the circuitry even when

the power is in the standby mode. When leaving home for long periods of time or when traveling, either press ON/STANDBY to turn off the power, or unplug the power cord from the power outlet.

•Be sure to stop playback before turning the power off.

Setting the layer to be played with priority

•The layer that is played with priority when the disc is loaded can be set.

•Upon purchase, the priority layer is set to the “SA-CD”.

1When “NO DISC” is displayed, press and hold
[MENU/SET].

The current priority layer is displayed.

2Press [MENU/SET] again and select the layer to be played with priority.

SA-CD CD

[Selectable items]

SA-CD : The SA-CD layer mode for Super Audio CDs.

CD : The CD layer mode for Super Audio CDs.

This setting is stored in the RCD-CX1’s memory and is not canceled even when the disc tray is opened or closed or the power is turned on or off. To change the setting, perform the above procedure again.

Operations During Playback

Adjusting the Master Volume
Either turn <VOLUME> or press [VOLUME df].

The volume level is displayed.

[Variable range]

–90.0dB

~

0.0dB

 

 

 

 

b When lowering the volume from –90.0 dB, the display shows “– –.– dB”.

Input Source Switching
Press SOURCE to select input source.

CD TUNER PHONO

LINE2 LINE1 (iPod)b

b The “iPod” indicator is displayed when a Control Dock for iPod is connected. (“NO iPod” is displayed if no iPod is connected to the Control Dock for iPod.)

Functions Other Timer the Setting Playback Setup Connections

nCompletely turning off the power

Unplug the power cord from the wall outlet.

b Note that the time setting is cleared when the power cord is unplugged from the outlet.

b The settings made for the various functions may be cleared if the power cord is left unplugged from a power outlet for an extended period of time.

Loading Discs

In the stop mode, press <2/5> to open the disc tray.

b “Loading Discs” (vpage 3).

Listening with Headphones
Plug the headphones (sold separately) into the <PHONES>.

b The sound from the speakers is automatically cut off.

Specifications Troubleshooting

nTo close the disc tray

Press <2/5> again.

b The disc tray also closes when 1/3 is pressed.

NOTE

•The power must be on when opening and closing the disc tray.

•Do not push the disc tray in by hand when the power is off. Doing so can damage it.

•Do not insert foreign objects into the disc tray. Doing so will damage it.

NOTE

Be careful not to set the volume too high when using headphones.

12