Cleaning Discs
•If there are fingerprints or dirt on discs, wipe them off before using the disc. Fingerprints and dirt can impair sound quality and cause interruptions in playback.
•Use a commercially available disc cleaning set or a soft cloth to clean discs.
About the Remote Control Unit
Inserting the Batteries
q Remove the remote control w Set two R03/AAA batteries in
unit’s rear cover.the battery compartment in the indicated direction.
ENGLISH
Operating Range of the Remote Control Unit
Point the remote control unit at the remote sensor when operating it.
Playback Setup Connections Started Getting
Gently wipe the disc from the | Do not wipe with a circular |
inside towards the outside. | motion. |
NOTE
Do not use record spray, antistatic agents, or benzene, thinner or other solvents.
ePut the rear cover back on.
NOTE
•Replace the batteries with new ones if the set does not operate even when the remote control unit is operated close to the unit.
•The supplied batteries are only for verifying operation.
•When inserting the batteries, be sure to do so in the proper direction, following the “q” and “w” marks in the battery compartment.
•To prevent damage or leakage of battery fluid:
•Do not use a new battery together with an old one.
•Do not use two different types of batteries.
•Do not attempt to charge dry batteries.
•Do not
•If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
•Remove the batteries from the remote control unit if it will not be in use for long periods.
30° 30°
Approx. 23 feet / 7 m
NOTE
The set may function improperly or the remote control unit may not operate if the remote control sensor is exposed to direct sunlight, strong artificial light from an inverter type fluorescent lamp or infrared light.
Specifications Troubleshooting Functions Other Timer the Setting