ENGLISH

Getting

 

Connecting Equipment with HDMI Connectors

 

 

Digital video and digital audio can both be connected using a single HDMI cable.

 

 

Started

 

NOTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• When playing multichannel sources, the audio output is downmixed to two channels for output. In

 

Connections

 

addition, the sampling frequency is lowered to 48 kHz.

 

 

• Video signals are not output properly when using devices that are not HDCP-compatible.

 

 

 

 

 

•Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI

 

 

 

connector. Normal playback may not be possible when using a cable other than one on which the HDMI

 

 

 

logo is indicated (a non-HDMI-certified product).

 

 

 

 

Setup

• The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted

 

 

by the connected device.

 

 

 

 

 

Playback

 

 

 

 

 

 

 

If the connected TV is only compatible with DVI-D terminals, use an HDMI/DVI conversion cable.

 

 

 

 

Remote

 

 

 

 

 

 

 

When connecting with an HDMI/DVI converter cable (adapter)

 

 

• HDMI video signals are theoretically compatible with the DVI format.

 

 

 

 

 

 

Control

 

When connecting to a TV, etc., equipped with a DVI-D terminal, connection is possible using an HDMI/

 

 

will not be output.

 

 

 

 

 

 

 

DVI converter cable, but depending on the combination of components in some cases the video signals

 

Information

 

• When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly

 

 

due to poor connections with the connected cable, etc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Troubleshooting

 

 

 

 

DVI-D-compatible

 

DVI-D-compatible

 

 

 

 

HDMI-compatible

 

monitor

 

 

Condition of signals

 

monitor

 

 

 

 

 

monitor

 

(HDCP non

 

 

 

from the S-302's HDMI

 

(HDCP compatible)

 

 

 

 

 

 

 

compatible)

 

 

 

output terminal

 

 

 

 

 

 

 

 

 

Both video and audio

Only video outputz

 

Neither video nor audio

 

 

 

 

 

 

 

 

 

 

 

output

 

output

 

 

 

 

 

 

 

 

z: Only output when video signals are of RGB format.

Copyright protection system

In order to play the digital video and audio signals of a DVD Video disc using HDMI connections, both the connected DVD player and TV must be equipped for a copyright protection system called “HDCP” (High- bandwidth Digital Content Protection).

HDCP is a copy protection technology consisting of data encoding and mutual identification of the devices. The S-302 is HDCP-compatible. Check the operating instructions of your TV to see if they are compatible.

Setting the HDMI output resolution

Set the resolution of the video signals output from the HDMI output terminal to a resolution with which the connected devices are compatible. Press HDMI on the remote control unit to select.

 

480p/576p

 

720p

 

1080i

 

1080p

 

AUTO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting the Playback Components

Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly.

Control Dock for iPod

Use either a DENON Control Dock for iPod

(ASD-1R, sold separately) or an iPod cable iPod (AK-P100, sold separately) to connect the S-

302 and an iPod.

• When using the Control Dock for iPod, certain settings must be made on the Control Dock for iPod. For details, refer to the Control Dock for iPod’s operating instructions.

• When using an iPod, refer to “iPod® Playback” (vpage 33).

12