ENGLISH

Playback Setup Connections Started Getting

fNetwork Setup

Make settings for wired or wireless LAN.

Wired LAN

Make settings for wired LAN.

Turn on the S-302’s power.

If a Ethernet cable is connected

The mode automatically switches to “Wired”.

Information Control Remote

To acquire the IP address automatically

using the DHCP function

To enter the IP address manually

At the GUI menu “SETUP” – “Network Setup”

–“Network Setup” – “Detail” setting, set “DHCP” to “OFF” and enter the IP address, subnet mask, default gateway, primary DNS and secondary DNS.

Troubleshooting

To not pass through the proxy server

 

To connect via proxy server

 

 

 

This setting is required when the network is established via proxy servers.

At the GUI menu “SETUP” – “Network Setup” – “Network Setup” – “Proxy” setting, set “Proxy” to “ON” and enter the address or domain name and port numbers.

This completes the setting.

Recheck the connections and settings if you cannot connect to the Internet (vpage 15).

NOTE Knowledge about networks is required to make the IP address and proxy settings. For details, consult a network administrator.

20