Denon S-302 manual 53

Symptom				Cause				Countermeasure	Page
Internet radio	• Ethernet		cable is		not	properly		• Check the connection status.	15
cannot be played.	connected			or	network		is
	disconnected.
	• Program		is	being	broadcast		in	• Only Internet radio programs in	–
	non-compatible format.							MP3 and WMA can be played on
								this set.
	• The	computer’s			or	router’s		• Check the computer’s or router’s	–
	firewall is activated.							firewall settings.
	• Radio	station is			not	currently		• Choose a radio station that is	35
	broadcasting.							currently broadcasting.
	• IP address is wrong.							• Check the set’s IP address.	20, 21
Server is not	• The	computer’s			or	router’s		• Check the computer’s or router’s	–
found, or it is	firewall is activated.							firewall settings.
not possible to	• Computer’s power is not turned							• Turn on the power.	–
connect to the	on.
server.	• Server is not running.							• Launch the server.	–
	• Set’s IP address is wrong.							• Check the set’s IP address.	20, 21
Cannot connect to	• Radio	station is			not	currently		• Wait a while before trying again.	–
preset or favorite	broadcasting.
radio stations.	• Radio station is not currently in							• It is not possible to connect to	–
	service.							radio stations that are no longer
								in service.
For some	• Station		is	congested		or not		• Wait a while before trying again.	–
radio stations,	currently broadcasting.
“Server Full”
or “Connection
Down” is
displayed and
station cannot be
connected to.
Sound is broken	• Network’s signal transfer speed							• This is not a malfunction. When	–
during playback.	is slow or communications lines							playing broadcast data with a
	or radio station is congested.							high bit rate, the sound may
								be broken, depending on the
								communications conditions.
Sound quality is	• File being played has a low bit							• This is not a malfunction.	–
poor or played	rate.
sound is noisy.

ENGLISH

GWireless LANH

Getting

Symptom

Cause

Countermeasure

Page

Cannot connect

• The

settings

of the SSID

• Match the network settings with

21

Started

to network.

and network key (WEP) are

the S-302’s settings.

incorrect.

• The

reception

is poor and the

• Shorten

the distance

from the

–

Connections

signals cannot be received.

try

reconnecting. Also

install

wireless LAN’s

access

point,

remove

any

obstacles

and

otherwise improve visibility, then

away from

microwave

ovens

Setup

networks.

and the access points of other

• There are multiple networks and

• Set

the

access

point’s channel

–

Playback

the usable channels overlap.

settings away from the channels

used

for

other

networks.

Alternatively,

connect

using a

network cable.

Remote

Played sound is

• There are multiple networks and

• Set

the

access

point’s channel

–

interrupted or

the usable channels overlap.

settings away from the channels

Control

sound cannot be

used

for

other

networks.

played.

Alternatively,

connect

using a

network cable.

Information

Troubleshooting

49