Playing Dolby Digital/DTS Multi- Channel Sources (Digital input only)

1Switch the input source (vpage 24). (DVD, AUX1 or AUX2 digital input)
2Use [SURROUND] to select the "DOLBY VS REF" or "DOLBY VS WIDE".

The “ ” indicator lights.

3Play sources with the or mark sources.

The “” or “ ” indicator lights, depending on the playback source's signal format.

4Use [SURROUND PARAMETER] to display the various surround parameters, then select with [o p].

[Selectable items] D.COMP LFE

Playing Dolby Digital/PCM/Analog 2- Channel Sources

1Switch the input source (vpage 24).

2Use [SURROUND] to select the "DOLBY VS REF" or "DOLBY VS WIDE".

The “” indicator lights.

3Play sources with the mark or PCM/ Analog sources.

The “” indicator lights, depending on the playback source's signal format.

4Use [SURROUND PARAMETER] to display the various surround parameters, then select with [o p].

[Selectable items] D.COMP LFE

To check the currently playing source and various settings

In the stop mode, press [STATUS].

b The playback source and the various surround settings are shown on the display each time the button is pressed.

Listening in the Dolby Headphone Mode

1Switch the input source (vpage 24).

Plug the headphones (sold separately) into the

<PHONES> jack.

The sound from the speakers is automatically cut off.

2Press [SURROUND] to select the “DOLBY H/P”

The “ ” indicator lights.

3Play the source.

4Use [SURROUND PARAMETER] to display the various surround parameters, then select with [o p].

[Selectable items]

D.COMP LFE CINEMA MUSIC

NOTE

Be careful not to set the volume too high when using headphones.

ENGLISH

 

Listening to Radio Broadcasts

 

Getting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Started

 

 

Tuning in Broadcast Stations

 

 

 

 

 

 

1Use <FUNCTION> or [FM/AM] to select “TUNER”.

 

Connections

 

 

 

 

 

: ”TUNER” (vpage 17)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use <BAND> or

[FM/AM] to

select the reception

 

Setup

2band.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FM AUTO

 

FM MONO

 

AM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use <+/–>, [TUNING +/–]or [o p] to select the

 

3reception frequency.

 

 

 

 

 

 

 

 

 

 

 

ControlRemote

A humming sound may be heard when using a TV nearby while

 

 

 

 

When a station is received, the “TUNED” indication will light.

 

 

receiving AM programs. If this happens, move the system as far from

Information

the TV as possible.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Display of the FM broadcast reception status

 

 

• When the reception band mode is set to “FM AUTO” and a stereo

Troubleshooting

 

broadcast is tuned in, the “ST” indicator lights.

 

 

• If the signal is weak and stable stereo reception is not possible, set

 

 

the reception band mode to “FM MONO” and receive the program

 

 

in monaural. The “MONO” indicator lights.

 

 

 

 

 

 

Main unit <+/–> button

 

 

 

 

 

 

 

 

 

 

 

 

There are two, switchable modes fo <+/–>the tuning mode for setting the reception frequency (setting upon purchase), and the preset mode for selecting the preset broadcast station.

nSwitching the preset mode

Pressing <+> while pressing in <BAND>. “PRESET” is flashes for approximately 5 seconds.

nSwitching the tuning mode

Pressing <–>while pressing in <BAND>. “TUNING” is flashes for approximately 5 seconds.

Auto tuning

When <+/–>, [TUNING +/–]or [o p] is pressed and held in, the set automatically starts searching for a broadcast station.

b Stations whose signal is weak cannot be tuned in.

31