INSPECTING BURNER
Continued
BURNER FLAME PATTERN
Figure 21 shows a correct burner flame pattern. Figure 22 shows an incorrect burner flame pattern. The incorrect burner flame pattern shows yellow tipping of the flame. It also shows the flame higher than 1/2 the glass panel height.
WARNING
WARNING ICON | G 001 |
If yellow tipping occurs, your heater could produce increased levels of carbon monoxide. If burner flame pattern shows yellow tipping, follow instructions at bottom of this page.
NOTICE
Do not mistake orange flames with yellow tipping. Dirt or other fine particles enter the heater and burn causing brief patches of orange flame.
1/2 GLASS HEIGHT
CORRECT FLAME PATTERN
AT HIGH POSITION
Figure 21 - Correct Burner Flame Pattern
Yellow
Tipping
1/2 GLASS HEIGHT
INCORRECT FLAME PATTERN
AT HIGH POSITION
Figure 22 - Incorrect Burner Flame Pattern
If burner flame pattern is incorrect, as shown in Figure 22
•turn heater off (see To Turn Gas To Appliance, page 19).
•see Troubleshooting, pages 22 through 25
21
101811
