Desa R, V, T, 30 installation manual Attaching Base to Fireplace Floor Remote-Ready Models Only

INSTALLATION

Installing Heater Base Assembly (Cont.)

11

INSTALLATION

Continued

3.Position heater base assembly in fireplace.

4.For Variable Manually-Controlled and Thermostatically-Con- trolled Models mark screw locations through holes in mount- ing brackets (see Figure 13). For Remote-Ready Models mark screw locations through holes in front panel of base (see Fig- ure 14). If installing in a brick-bottom fireplace, mark screw locations in mortar joint of bricks.

5.Remove heater base from fireplace.

6.Remove mounting brackets from heater base (Variable Manu- ally-Controlled and Thermostatically-Controlled Models Only).

7.Drill holes at marked locations using 3/16" drill bit.

8.For Variable Manually-Controlled and Thermostatically-Con- trolled Models attach mounting brackets to fireplace floor using masonry screws provided in hardware package (see Figure 13). Reattach heater base to mounting brackets (see Figure 13). Tighten nuts firmly.

9.For Remote-Ready Models attach base, through holes in front panel of base, to fireplace floor using masonry screws pro- vided in hardware package (see Figure 14).

10.Connect to gas supply. See Connecting To Gas Supply, page 12.

Heater Gas

Regulator

Flexible Gas Hose (if allowed by local codes)

Figure 11 - Attaching Flexible Gas Hose to Heater Gas Regulator (Variable Manually-Controlled and Thermostatically-Controlled Models Only)

Gas Control

Flexible Gas Hose (if allowed by local codes)

Figure 12 - Attaching Flexible Gas Hose to Heater Gas Regulator (Remote-Ready Models Only)

Masonry

Screw

Mounting

Bracket

Screw

Mounting
Bracket Nut	Mounting Bracket

Figure 13 - Attaching Heater to Fireplace Floor (Variable Manually- Controlled and Thermostatically-Controlled Models Only)

Masonry Screw

Masonry Screw

Figure 14 - Attaching Base to Fireplace Floor (Remote-Ready Models Only)

For morevisit www..com

110882-01C