Desa BC115CT Service Procedures, Continued, Fuel Filter, Ignitor, from Ignition Control Assembly

SERVICE PROCEDURES

Continued

FUEL FILTER

1.Remove side cover screws using 5/16" nut- driver.

2.Remove side cover.

3.Pull upper fuel line off fuel filter neck (see Figure 15 or 16).

4.Carefully pry bushing, fuel filter, and lower fuel line (115T/165T models only) out of fuel tank (see Figure 16).

5.Wash fuel filter with clean fuel and replace in tank.

6.Attach upper fuel line to fuel filter neck.

7.Replace side cover.

Fuel Filter

Side

Cover

Upper Fuel Line

Figure 15 - Fuel Filter Removal,

40/55T/70T Models

Fuel Filter, Bushing,

and Lower Fuel Line

Side

Cover

Upper Fuel Line

Figure 16 - Fuel Filter Removal,

115T/165T Models

IGNITOR

1.Remove upper shell and fan guard (See Upper Shell Removal, page 9).

2.Remove fan (see page 9).

3.Remove 4 side cover screws with a 5/16" nut driver. Remove side cover (see Figures 15 and 16).

4.Disconnect ignitor wires (yellow) from igni- tion control assembly (see Figure 17). Pull the ignitor wires up through the hole in the lower shell.

5.Disconnect fuel line hose and air line hose. Remove photocell from photocell bracket (see Figure 17).

6.Remove combustion chamber. Stand com- bustion chamber on end with nozzle adapter bracket on top (see Figure 18).

	Nozzle
Combustion	Adapter
	Bracket
Chamber
Air Line	Ignitor
Hose	Ignitor Wire
Fuel Line	(Yellow)
Hose
Photocell
Bracket
	Ignition
Photocell	Control
Assembly	Assembly
Side Cover
Figure 17 - Disconnecting Ignitor Wires
from Ignition Control Assembly
Ignitor Screw/
Washer Assembly	Ignitor
Ignitor Element	Nozzle
Photocell	Adapter
Bracket	Bracket

Combustion Chamber	Nozzle Adapter
	Bracket Opening
Figure 18 - Ignitor Replacement

111168-01A www.desatech.com 11