Desa CGD3924PR, CGB3924PR, CGB3930PR installation manual Mantel Clearances, Floor Clearances

OWNER’S MANUAL

INSTALLATION

Continued

MANTEL CLEARANCES

If you meet minimum clearance between mantel shelf and top of fireplace opening, a hood is not required (see Figure 6).

If minimum clearances in Figure 6 are not met, you must have a hood. When using a hood there are still certain minimum mantel clearances required. Follow minimum clear- ances shown in Figure 7 when using hood.

10"

8"

6"

2 1/2"

Minimum Non-	(A)
Combustible
Material
	12"

Mantel Shelf

18" 20" 22"

Underside of

Mantel Shelf

All minimum distances are in inches

24" Log Set

24"/30" Models

Top of Fireplace

Opening

NOTICE: If your installation does not meet the minimum clearances shown, you must do one of the following:

•	operate the logs only with the
	flue damper open
•	raise the mantel to an accept-
	able height

Minimum Non-	Distances to
Combustible	Underside of
Material Height	Mantel

Figure 6 - Minimum Mantel Clearances Without Using Hood

Mantel Shelf

• remove the mantel.

Floor Clearances

A.If installing appliance on the floor level, you must maintain the minimum dis- tance of 14" to combustibles (see Fig- ure 8).

B.If combustible materials are less than 14" to the fireplace, you must install appliance at least 5" above the combus- tible flooring (see Figure 9).

	12"
	10"
	8"
	6"
	2 1/2"
Minimum Non-
Combustible
Material	8"	12"	15"
	Min.
	Hood	Distances to
	(GA6050, GA6052)
		Underside of
		Mantel

18"

Underside of

Mantel Shelf

All minimum distances are in inches

Log Set

20" All Models

Top of Fireplace Opening

Figure 7 - Minimum Mantel Clearances When Using Hood

	Combustible
14"	Material	Hearth	Combustible
Min.
		5"	Material
Non-Combustible		Min.
Material

Figure 9 - Minimum Fireplace Clearances

Figure 8 - Minimum Fireplace Clearances Above Combustible Flooring If Installed at Floor Level

Continued

104307 9