14

VENTING INSTALLATION

Installation for Horizontal Termination (Cont.)

VENTING INSTALLATION

Continued

3.Attach vent pipe assembly to the burner system. Set stove in front of it’s permanent location to insure minimum clearances. Mark the wall for a 10" (25.4 cm) square hole (for noncom- bustible material such as masonry block or concrete, a 7 1/2" [19.1 cm] diameter hole is acceptable). See Figure 25. The center of the hole should line up with the center-line of the horizontal rigid vent pipe. Cut a 10" x 10" (25.4 cm x 25.4 cm) square hole through combustible exterior wall (7 1/2" [19.1 cm] diameter hole if noncombustible). Frame as necessary (see Figure 27).

4.Noncombustible Exterior Wall: Apply a bead of non-harden- ing mastic around the outside edge of the vent cap. Position the vent cap in the center of the 7 1/2" (19.1 cm) hole on the exterior wall with the arrow on the vent cap pointing up. Attach the vent cap with four wood screws provided (see Figure 28). Note: Re- place the wood screws with appropriate fasteners for stucco, brick, concrete, or other types of siding.

WARNING: Do not recess vent termination in to any wall. This will cause a fire hazard.

Combustible Exterior Wall: For vinyl siding, stucco, or wood exteriors, a siding standoff must be installed between the vent cap and exterior wall. The siding standoff prevents excessive heat from damaging siding materials. Siding materials must be cut to accommodate standoff. Bolt the vent cap to the stand- off. Apply non-hardening mastic around outside edge of the standoff. Position the standoff/cap assembly in the center of the 10" (25.4 cm) square hole and attach to exterior wall with wood screws provided (see Figure 29). The siding standoff must sit flush against the exterior fascia material.

6.Carefully move the fireplace with vent assembly attached toward the wall and insert the vent pipe into the horizontal termination. The pipe overlap should be a minimum of 1 1/4" (3.2 cm). Fasten all vent pipe connections (except vent cap) with screws provided.

7.Combustible Exterior Wall Only: Slide the wall firestop against the interior wall surface and attach with screws pro- vided (see Figure 30).

Vent Cap

Wood Screw

Figure 28 - Installing Horizontal Vent Cap (Noncombustible Exterior)

Cut Vinyl Siding

Away to Fit Standoff

Standoff

Wood Screw

5.Combustible Exterior Wall Only: Slide the interior wall firestop over the vent pipe before connecting the horizontal run to the vent cap (see Figure 30).

Apply Mastic

to All Four Sides

Vent Cap

Bolt

Figure 27 - Vent Opening Requirements

Figure 29 - Installing Vinyl Siding Standoff (Combustible Exterior Wall)

Interior Wall

Surface

Interior Wall Firestop (Combustible Exterior Wall Only)

 

Horizontal

 

Vent Pipe

Vent Cap

Screw

(Horizontal

 

Termination)

 

Figure 30 - Connecting Vent Cap with Horizontal Vent Pipe

For..com

111739-01A

Page 14
Image 14
Desa CSDPBN, CSDBN installation manual Installing Horizontal Vent Cap Noncombustible Exterior

CSDBN, CSDPBN specifications

Desa CSDPBN and CSDBN represent cutting-edge advancements in the realm of community-driven development and data-centric governance. These initiatives are designed to empower local communities by integrating technology with robust administration strategies to enhance public service delivery, economic development, and social welfare.

One of the main features of Desa CSDPBN is its focus on participatory governance, allowing community members to actively engage in decision-making processes. This framework encourages transparency and accountability, enabling citizens to voice their needs and priorities while fostering a sense of ownership over local projects. Such involvement helps create tailored solutions that effectively address the specific challenges faced by the community.

Technologically, Desa CSDPBN leverages an array of digital tools that facilitate real-time data collection and analysis. This includes geographic information systems (GIS) and mobile application development to gather insights on resource allocation, infrastructure needs, and demographic information. By employing data analytics, local governments can make informed decisions that enhance resource distribution and service delivery.

The characteristics of CSDPBN and CSDBN systems also extend to their adaptability and scalability. These frameworks are designed to be flexible, allowing them to be replicated across different regions with varying socio-economic contexts. This scalability ensures that diverse communities can benefit from the same foundational principles while customizing aspects to suit their unique environments.

Further enhancing their effectiveness, both initiatives incorporate capacity-building efforts aimed at training local leaders and stakeholders in the use of technology and project management. Such educational components empower communities to sustain development initiatives while fostering local expertise.

Additionally, the integration of social media and online platforms within the Desa CSDPBN framework promotes civic engagement and collaboration among community members. This connectivity nurtures a sense of unity and collective responsibility while improving communication between citizens and local authorities.

Ultimately, Desa CSDPBN and CSDBN embody a holistic approach to community development by harmonizing technology, governance, and citizen participation. They represent a transformative model that not only addresses immediate development needs but also lays the groundwork for sustainable growth and resilience in local communities. As these practices gain traction, they pave the way for a more equitable and inclusive future, where every voice contributes to the narrative of progress.