Desa VSGF33NRB Continued, On/Off Model Ghrcb, Thermostat Model Ghrctb, Thermostat Hand-Held

OPERATING FIREPLACE

Continued

Flame Adjustment Knob

			OL
ON	N
OFF	O		O
REMOTE	T	F
	O
		F
	LIP		HI

Selector Switch in Remote	Control Knob
Position (Optional Hand-	in On Position
Held Remote Control)

Figure 31 - Setting the Selector Switch, Control Knob, and Flame Adjustment Knob for Hand-Held Remote Operation

ON/OFF MODEL GHRCB

Hold the control button on the hand-held remote until burner turns on. Hold the control button again until burner turns off (see Figure 32).

TO LOCK press both buttons on hand-held re- mote control until light stops flashing. Hand- held remote control is now locked. If the fire is on it will be turned off automatically. In the locked state, the light will not light up when any button is pressed.

TO UNLOCK press both buttons together on hand-held remote control until the light stops flashing. The hand-held remote is now unlocked.

Control Button

Turns Burners

On and Off

Figure 32 - On/Off Hand-Held Remote

Control Unit

THERMOSTAT MODEL GHRCTB

The hand-held remote can be operated using either the manual mode (MANU) or thermo- static mode (AUTO) (see Figure 33). To select Fahrenheit/Centigrade mode display, carefully press the ˚C/˚F mode button with the end of a paper clip or similar blunt object.

Manual Mode

1.Press the POWER and LOCK buttons to- gether to turn on the hand-held remote control.

2.Press the MANU button to turn on the fireplace.

3.Press the POWER and LOCK buttons to- gether to turn off the fireplace.

Auto (Thermostatic) Mode

1.Press the POWER and LOCK buttons to- gether to turn on the hand-held remote con- trol.

2.Press AUTO button to select this mode.

3.Set the desired room temperature by press- ing the TEMP + or - buttons.

4.Press the POWER and LOCK buttons to- gether to turn off the fireplace

Note: Do not leave the hand-held remote in the AUTO mode close to the fireplace. The radiant heat from the fireplace will turn off the fire- place. Ideally, place the hand-held remote in the center of the room facing towards the fireplace. Note: Do not hold the hand-held remote for a long time. Body temperature will affect its op- eration in the AUTO mode.

Digital		Turns Hand-
Display		Held Remote
Shows		On or Off and
Temperature		Allows You to
and		Choose the
Settings		Manual
		Setting
Turns		Selects Auto
Burners On
or Off		Setting
Decreases		Increases
Room		Room
Temperature		Temperature
in AUTO	Locks System	in AUTO
Mode	to Prevent	Mode

Accidental Ignition

Figure 33 - Thermostat Hand-Held

Remote Control Unit Selections GHRCTB

Safety Features

When away from home for an extended period of time or as a child safety feature to prevent accidental ignition of the fireplace, the receiver ON/OFF/REMOTE switch should be in the OFF position.

Auto Shutoff Feature

1.If the average room temperature exceeds 82 degrees Fahrenheit (28 degrees Centi- grade), the hand-held remote control will perform a safety override and shut the fire- place off. This feature is not available in the MANU mode.

113132-01A www.desatech.com 19