INSTALLING
Continued
16
5.Route flexible gas line through access hole in hearth base.
6.Center cabinet mantel on hearth base (see Figure 15). Make sure mantel is flush against wall.
Cabinet Mantel
Figure 15 - Installing Cabinet Mantel
7.Break off nailing flanges (see Figure 16) with hammer or pliers. IMPORTANT: If installing Brass Trim Kit GA6090, see instructions included with brass trim accessory.
Nailing Flanges
Figure 16 - Location of Nailing Flanges
8.Place cardboard or other protective material on top of hearth base. Carefully set firebox on protective material, with back of firebox inside mantel opening.
9.Attach flexible gas line to log set. See Connecting to Gas Supply in your log set owner’s manual.
103296
