INSTALLING | 10. | If installing GA3500A blower (FB32C firebox only), route blower electrical |
| cord through bushing in right side firebox support and bushing in side access | |
|
| |
Continued |
| opening of firebox. Plug electrical cord into electrical outlet. See Installing |
|
| Blower Accessory, page 12. |
| 11. | Carefully insert firebox into cabinet mantel. Be careful not to scratch or damage |
|
| hearth base, cabinet mantel, or any laminate trim on hearth base. Remove |
|
| protective material from top of hearth base and from front of firebox (if any). |
| 12. | If using optional GA6090 brass trim kit, install the trim after final finishing |
|
| and/or painting of wall. See instructions included with brass trim accessory for |
|
| attaching brass trim. |
| 13. | Check all gas connections for leaks. See Checking Gas Connections in log set |
|
| owner's manual. |
Figure 17 - Inserting Firebox Into Cabinet Mantel
BUILT-IN FIREBOX INSTALLATION
| Height | Front Width | Depth |
| |||
|
|
|
|
|
|
| |
Model # | Actual | Framing | Actual | Framing | Actual | Framing | |
|
|
|
|
|
|
|
|
FB32C | 32 3/8" | 33" | 34 5/16" | 35 1/2" | 16 11/16" | 17 | 3/4" |
FB32NC | 33 11/16" | 34 1/4" | 34 5/16" | 35 1/2" | 16 11/16" | 17 | 3/4" |
1.Frame in rough opening. Use dimensions shown in Figure 18 for the rough opening.
17 3/4"
33" (FB32C)
34 1/4" (FB32NC)
35 1/2" |
|
Figure 18 - Rough Opening for Installing in Wall | Continued 17 |
|
103296
