INSTALLATION
Installing Logs (Cont.)
17
INSTALLATION
Continued
Models LGX3924NT and LGX3924PT
1. Place log #1 (ember bed) onto the base. Position the log over the shoulder bolts on either side of the front burner. The log will sit on top of the front burner (see Figure 28).
2. Place log #2 behind the back burner and onto the two back tabs as shown in Figure 29.
3. Place log #3 on the left side of the base. It will wrap around the front end of the back burner and fit over the tab at the front of the base (see Figure 30).
4. Place log #4 onto the pins on the right side of log #1 and onto the tab on the base in front of log #2 (see Figure 31).
5.Place log #5 crossing over log #2 and log #1 as shown in Figure 32.
Figure 30 - Installing Log #3 (Model LGX3924NT Shown)
Figure 28 - Installing Log #1 [Ember Bed] (Model LGX3924NT Shown)
Figure 31 - Installing Log #4 (Model LGX3924NT Shown)
Figure 29 - Installing Log #2 (Model LGX3924NT Shown) | Figure 32 - Installing Log #5 (Model LGX3924NT Shown) |
For
.
.com
108114
