Desa manual Motion Sensor Light Control, Operation, Dualbrite, Model SH-5597, Features, Test

Models: SH-5597

1 8
Download 8 pages 43.18 Kb
Page 1
Image 1
DUALBRITE®

DUALBRITE®

Motion Sensor

Light Control

Model SH-5597

Features

DUALZONE™ Technology.

Turns on lighting when motion is detected.

Automatically turns lighting off.

DUALBRITE® Timer.

Photocell keeps the lighting off during daylight hours.

LED indicates motion was sensed (day or night).

This package includes:

OPERATION

Mode:

On-Time:

Works: Day

Night

 

 

 

 

Test

5 Sec

x

x

Auto

1, 5, 20 min.

 

x

Manual

Until Dawn*

 

x

 

 

 

 

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put ON-TIME switch

ON-TIME

DUALBRITE®

on the sensor bottom

 

 

 

 

 

 

 

 

 

toTEST and the DUAL-

 

 

 

 

 

 

 

 

 

 

 

 

Off 3 6 Dusk to

 

TEST 1 5 20

 

BRITE® switch OFF.

 

 

 

Dawn

 

 

 

 

 

 

 

 

 

 

 

AUTO

 

 

 

 

 

 

 

 

 

 

 

 

Put the ON-TIME switch in the 1,

 

ON-TIME

5, or 20 minute position.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEST 1 5 20

 

 

 

 

 

 

 

 

 

 

 

Lamp

6 Screws

Holders

(3 sizes included)
MANUAL MODE

Gasket

Cover

PlateSensor

Light Control

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 20 position.

1 Second OFF

then...

 

 

2 Wire

Mounting Bolt

Mounting Strap

Connectors

 

 

Plastic Hanger

Rubber Plug

2 Lamps

(installed)

Requirements

The Light Control requires 120-volts AC.

If you want to use Manual Override, the control must be wired through a switch.

Some codes require installation by a qualified electrician.

This product is intended for use with a junction box marked for use in wet locations.

 

 

 

 

 

 

 

 

... back on.

 

Mode Switching Summary

 

 

 

 

 

TEST

 

 

 

Move ON-TIME Switch to

 

 

 

 

 

 

 

 

 

 

 

 

 

1, 5, or 20 minutes

 

 

 

 

 

 

 

 

 

AUTO

 

 

 

 

 

Flip light switch off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

for one second then

 

 

 

 

 

 

 

 

back on*
MANUAL MODE

 

 

 

 

 

 

 

 

 

 

 

*If you get confused while switching modes, turn the power off for one minute, then back on. After the cali- bration time the control will be in the AUTO mode.

DUALBRITE® TIMER

Light comes on half bright for selected time after dusk (Off, 3 hr., 6 hr., until dawn). If motion is sensed, the light turns on full bright for the ON-TIME (1, 5, or 20 minutes) then returns to dim mode.

© 2006 DESA Specialty Products™

598-1162-01

Page 1
Image 1
Desa manual Motion Sensor Light Control, Operation, Model SH-5597, Features, Requirements, Dualbrite Timer, On-Time