FIREPLACE INSTALLATION
Installing Optional Brick Liner Model BL32D (Cont.) Installing Logs, Lava Rock and Glowing Embers
23
FIREPLACE INSTALLATION
Continued
Left Side
Brick Panel
2.Rest log #2 (large front log) on the pins on the front part of the grate (see Figure 45).
3.Place log #3 (crossover log) onto the rear and front logs. Make sure it is seated properly on the smooth surface on the front log and on the pin on the back log as shown in Figure 46.
4.Place log #4 (right log) on the pin on the right side of front log as shown in Figure 47.
2
Figure 43 - Installing Side Brick Panels
INSTALLING LOGS, LAVA ROCK AND GLOWING EMBERS
Each log is marked with a number. These numbers will help you identify the log when installing. It is very important to install these logs exactly as instructed. Do not modify logs. Only use logs sup- plied with fireplace.
Open louvers, remove screen, unlock door latches and open glass door. See steps 1 and 2 of Removing Glass Door, page 22. Install logs according to instructions for fireplace model numbers.
1.Place log #1 (rear log) on top of grate. Make sure the notches in the bottom of the log fit over the grate (see Figure 44).
1
Figure 45 - Installing Log No. 2
Figure 46 - Installing Log No. 3
3
4 
Figure 44 - Installing Log No. 1
Figure 47 - Installing Log No. 4
www.desatech.com |
