Desa VF-30N-PJD installation manual Table of Contents

TABLE OF CONTENTS

Safety Information	2	Troubleshooting		20
Product Identification	4	Wiring Diagram		23
Local Codes	5	Service Hints		24
Unpacking	5	Technical Service		24
Product Features	5	Replacement Parts		24
Air For Combustion and Ventilation	5	Specifications		25
Installation	8	Accessories		25
Operating Heater	14	Illustrated Parts Breakdown and Parts List		26
Inspecting Burners	18	Warranty Information	Back Cover
Cleaning and Maintenance	19

Safety Information

WARNING: Improper in- stallation, adjustment, al- teration, service or main- tenance can cause injury or property damage. Refer to this manual for correct installation and operation- al procedures. For assis- tance or additional infor- mation consult a qualified installer, service agency or the gas supplier.

WARNING: This appliance is for installation only in a solid-fuel burning mason- ry or UL127 factory-built fireplace or in a listed vent- less firebox enclosure. It is design-certified for these installations in accor- dance with ANSI Z21.11.2. Exception: Do not install this appliance in a fac- tory-built fireplace that includes instructions stat- ing it has not been tested or should not be used with unvented gas logs.

WARNING: This is an unvented gas-fired heat- er. It uses air (oxygen) from the room in which it is installed. Provisions for adequate combustion and ventilation air must be provided. Refer to Air for Combustion and Ven- tilation section on page 5 of this manual.

This appliance may be in- stalled in an aftermarket,* permanently located, manufactured (mobile) home, where not prohib- ited by local codes.

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

*Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer

www.desatech.com111826-04C