INSTALLATION
Continued
INSTALLING LOGS
WARNING:Failuretoposition thepartsinaccordancewiththese diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.
Each log is marked with a number. These num- bers will help you identify the log when install- ing. It is very important to install these logs ex- actly as instructed. Do not modify logs. Only use logs supplied with heater.
1.Place front log (#1) on top of the grate. Make sure the notches in the bottom of the log fit over the grate prongs (see Figure 24). Push back of logs flush with metal grate bars.
2.Rest middle log (#2) behind metal posts on grate assembly. Make sure the grooves in the bottom of the log fit over the grate. Bring the log forward next to the metal posts (see Fig- ure 25).
3.Slide the grooves in the back of the rear log (#3) against the rear grate prongs. Make sure the log fits securely over the prongs (see Fig- ure 26). Make sure log is completely vertical and not leaning in toward burner where the flame will touch the log.
4.Install fireplace screen by slipping notches of fireplace screen over screws on front of fire- place (see Figure 27).
Front Log (#1)
Notch
Grate
Prongs
Metal Grate Bars
Figure 24 - Installing Front Log (#1)
Middle Log (#2)
Groove
Groove
Metal Post
Grate
Figure 25 - Installing Middle Log (#2)
Groove | Rear Log (#3) |
in Back | |
of Log |
|
Grate
Prong 
Groove
in Back
of Log
Grate
Prong
Figure 26 - Installing Rear Log (#3)
Screws for
Mounting
Screen
Notches
Figure 27 - Installing Fireplace Screen
16 | www.desatech.com |
