DeVillbiss Air Power Company MG-NS2X4A, NBSNC2X4, NF2502X4, SNC1002X4 Clearing a JAM from the Tool

CLEARING A JAM FROM THE TOOL

Disconnect tool from air compressor before adjusting, clearing jams, servicing, relocating and during non-operation.

FASTENER JAMMED IN FASTENER DISCHARGE AREA:

1.Disconnect tool from air hose.

2.NF2502X4, NB1252X4, NB2002X4, NBSNC2X4

Release the magazine latch to open the magazine.

Magazine

Latch

SNC1002x4

Pull feeder shoe back into "locked" position.

Feeder

3.Remove fasteners from magazine.

4.NF2502X4, SNC1002X4, NB2002X4, and NB1252X4

Lift nose cover latch to unlatch and re- move driver guide cover.

Nose

Cover

Latch

NBSNC2x4

Loosen the screws on the driver guide cover and then remove the driver guide cover.

5. Using pliers remove fasteners.

6.NF2502X4, NB1252X4, NB2002X4, and SNC1002X4

Replace nose cover and latch into place.

NBSNC2X4 Replace nose cover.

7.Reload fasteners into magazine. Refer to Loading the Tool section in this manual.

PAGE 13