DeWalt D25851K Complete Torque Control Fig, Inserting and Removing SDS Max Accessories Fig

3.If the chisel groove is not aligned with the symbol, or is not inserted to the complete depth the lock symbol remains open.

To remove the bit, pull back the locking sleeve and pull the bit out.

FIG. 4 M R

Q

4. To remove the bit, pull back the locking sleeve and pull the bit out.

Complete Torque Control (Fig. 5)

D25602

NOTICE: Always turn the tool off before changing torque control settings or damage to tool may result.

The Complete Torque Control (CTC) feature of this tool is designed to provide additional control with a two-stage clutch mechanism. Clutch Setting 1 (S) is designed for most hammerdrilling applications and is designed to easily clutch out when the drill bit encounters re-bar or other foreign substances.

P

Inserting and Removing SDS Max® Accessories (Fig. 4)

D25501, D25602, D25820, D25831

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/installing attachments or accessories.

1.Pull back the locking sleeve (P) and insert the bit shank. The bit shank must be clean.

2.Turn the bit slightly until the sleeve snaps back into position.

3.Ensure the bit is properly engaged.

NOTE: The bit needs to move several centimeters in and out of the tool holder (M) when properly engaged.

Clutch Setting 2 (T) is designed for higher torque applications such as core- bits and deep hole hammerdrilling and is designed to clutch out at a higher torque threshold.

Move the torque control lever (U) to setting 1 or 2 as needed for application.

NOTE: Allow the motor housing to rotate a little while changing torque.

Each time the tool is plugged in, it will automatically default to clutch setting 1, the most sensitive setting.

FIG. 5

S

T

U

G

V

W

	CTC COMPLETE			TORQUE CONTROL
									SDS MAX
	D25XXX		1 3/4" (44mm)
			ROTARY HAMMER
		SER.
			TO REDUCE				THE RISK OF INJURY,
	WARNING		USER MUST					AND		HANDLE.
			PROPER EYE, EAR
	MANUAL	. ALWAYSUSE		. ALWAYS USE SIDE						DE
		RY PROTECTION
	RESPIRATO					LEA EL MANUAL PARA
	ADVERTENCIA					INSTRUCCIONES
									UTILICE
	UN FUNCIONAMIENTO		SEGURO. SIEMPRE						OÍDOS Y VÍAS
				PARA LOS OJOS,						LATERAL.
1	PROTECCIÓN ADECUADA			UTILICE EL MANGO
	ATORIAS. SIEMPRE						AFIN DE MINIMISER
	RESPIR						LES RISQUES DE
	AVERTISSEMENT							LE GUIDE
		L’UTILISATEUR			DOITLIRE
							UNE PROTECTION
	BLESSURES, .TOUJOURS UTILISER							ADÉQUATE.
	D’UTILISATION		ET RESPIRATOIRE
2	OCULAIRE, AUDITIVE		LATÉRALE.
	UTILISER LA POIGNÉE
						Service
						Lock-On
						Brush Service

English

33