MAINTENANCE
Removing and Replacing Belt
The belt is designed to last the life of the tool. However, abuse of the tool could cause the belt to fail. If the blade does not turn when the motor is running, the belt has failed. To inspect or replace the belt, follow these directions:
1.Remove the belt cover screw.
2.Remove the belt cover. Inspect the ribs of the belt for wear or failure. Check belt tension by squeezing the belt as shown in figure 37. The belt should contact the center boss when it is squeezed firmly with the thumb and index finger.
3.To adjust the tension, loosen, but do not remove, the four screws shown (figure 37). Rotate the set screw on the top of the motor plate casting until the proper tension is achieved. Tighten the six screws securely and replace the belt cover.
NOTE: Overtightening the belt will cause premature motor failure.
•All bearings are sealed ball bearings. They are lubricated for life and need no further maintenance. Do not use WD- 40 or any other lubricant.
•Periodically clean all dust and wood chips from around the area of the saw. Even though slots are provided to allow debris to pass through, some dust will accumulate.
FIG. 37 | SET |
| SCREW |
| SCREWS |
CENTER BOSS
•The brushes are designed to give you several years of use. If they ever need replacement follow the instructions on page 8 or return the tool to the nearest service center for repair. Service center locations are packed with your tool.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.
Three Year Limited Warranty
DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call
In addition to the warranty, DEWALT tools are covered by our:
1 YEAR FREE SERVICE
DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund – no questions asked.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call
English
15
