DeWalt DWFP12658 instruction manual Bump or Contact Actuation Trigger Mode, To Avoid Double Fires

cap when working in restricted areas. Sudden recoil can result in impact to the body, especially when nailing into hard or dense material. (Fig. S)

•Grip tool firmly to maintain control while allowing tool to recoil away from work surface as fastener is driven. In bump action mode (contact actuation mode) If contact trip is allowed to recontact work surface before trigger is released an unwanted fastener will be driven.

•Choice of triggering method is important. Check the manual for triggering options.

BUMP OR CONTACT ACTUATION TRIGGER MODE

•When using the bump action trigger mode, be careful of unin­tentional double fires resulting from tool recoil. Unwanted fasteners may be driven if the contact trip is allowed to accidentally re-contact the work surface. (Fig. T)

TO AVOID DOUBLE FIRES:

•Do not engage the tool against the work surface with a strong force.

•Allow the tool to recoil fully after each actuation.

•Use sequential action trigger mode.

•When bump actuating the nailer, always keep tool in control. Inaccurate placement of tool can result in misdirected discharge of a fastener.

SEQUENTIAL ACTION TRIGGER MODE

•When using the sequential action trigger mode, do not actuate the tool unless the tool is placed firmly against the workpiece.

•DEPTH ADJUSTMENT: To reduce risk of serious injury from accidental actuation when attempting to adjust depth, ALWAYS:

•Disconnect air supply.

•Engage trigger lock

•Avoid contact with trigger during adjustments.

•Do not drive nails blindly into walls, floors or other work areas. Fasteners driven into live electrical wires, plumbing, or other types of obstructions can result in injury. (Fig. U)

•Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs or alcohol. A moment of inattention while operating power tools may result in serious personal injury.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the Sate of Califomia to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

Fig. P

Fig. Q

Fig. R

Fig. S

Fig. T

FIG. U

5 - ENG